Antec ISK300-150 Case Review

The Power Supply: Load Test

In Figure 14 you have an overall look of the power supply that comes with ISK300-150, an Antec-braded 150 W model (FP-150-8). This unit features active PFC and automatic voltage selection.

The included power supply has the following cables:

• Main motherboard cable with a 20/24-pin connector (10” or 25 cm long).
• Cable with one ATX12V connector (13 3/8” or 34 cm long)
• One cable with two SATA power connectors and one miniature SATA power connector (10” or 25 cm to the first connector, 7 7/8” or 20 cm between connectors).
• One cable with two SATA power connectors (10” or 25 cm to the first connector, 7 7/8” or 20 cm between connectors).
• One cable with two standard peripheral power connector and one floppy disk drive power connector (10 ¼” or 26 cm to the first connector, 7 ½” or 19 cm between connectors).

All wires are 20 AWG, but being a 150 W product we really can’t complain.

Figure 14: 150 W power supply that comes with Antec ISK300-150.

Figure 15: 150 W power supply that comes with Antec ISK300-150.

Since we have the necessary equipment to make in-depth power supply tests, we decided to test the 150 W power supply that comes with ISK300-150 to see whether it is a good unit or not.