SHARE

Overload Tests

Below you can see the maximum we could pull from this power supply. The objective of this test is to see if the power supply has its protection circuits working properly. This unit passed this test, since it shut down when we tried to pull more than what is listed below. During this test, noise and ripple levels were still extremely low, with all outputs still within their tighter-than-usual range.

Input Overload Test
+12VA 32 A (384 W)
+12VB 32 A (384 W)
+5 V 20 A (100 W)
+3.3 V 20 A (66 W)
+5VSB 3 A (15 W)
-12 V 0.5 A (6 W)
Total 951.4 W
% Max Load 126.9%
Room Temp. 48.8° C
PSU Temp. 52.7° C
AC Power 1,128 W
Efficiency 84.3%
AC Voltage 108.6 V
Power Factor 0.997
1
2
3
4
5
6
7
8
9
10
11
12
13
Gabriel Torres is a Brazilian best-selling ICT expert, with 24 books published. He started his online career in 1996, when he launched Clube do Hardware, which is one of the oldest and largest websites about technology in Brazil. He created Hardware Secrets in 1999 to expand his knowledge outside his home country.