SHARE

Main Specifications

The main specifications for the In Win Commander III 700 W power supply include:

  • Standards: ATX12V 2.31 and EPS12V 2.92
  • Nominal labeled power: 700 W
  • Measured maximum power: 849.4 W at 49.4° C
  • Labeled efficiency: 80 Plus Gold certification (87% at light/20% load, 90% at typical/50% load, and 87% at full/100% load) 
  • Measured efficiency: Between 86.6% and 90.6% at 115 V (nominal, see complete results for actual voltage)
  • Active PFC: Yes
  • Modular Cabling System: Yes, partial
  • Motherboard Power Connectors: One 20/24-pin connector and one cable with two ATX12V connectors that together form an EPS12V connector, permanently attached to the power supply
  • Video Card Power Connectors: Four six/eight-pin connectors on two cables, one permanently attached to the power supply and one on the modular cabling system
  • SATA Power Connectors: Nine on three cables, modular cabling system
  • Peripheral Power Connectors: Three on one cable, modular cabling system
  • Floppy Disk Drive Power Connectors: One
  • Protections (as listed by the manufacturer): Over voltage (OVP), under voltage (UVP), over current (OCP), over power (OPP), and short-circuit (SCP)
  • Are the above protections really available? Yes.
  • Warranty: Five Years
  • More Information: http://www.inwin-style.com
  • MSRP in the U.S.: USD 130.00
1
2
3
4
5
6
7
8
9
10
11
12
13
Gabriel Torres is a Brazilian best-selling ICT expert, with 24 books published. He started his online career in 1996, when he launched Clube do Hardware, which is one of the oldest and largest websites about technology in Brazil. He created Hardware Secrets in 1999 to expand his knowledge outside his home country.