In Figure 10, you can see the backplate for use on Intel CPUs. You must insert the four nuts into the backplate before attaching it to the solder side of the motherboard.
Before installing the WATER2.0 Extreme, you must assemble the frame with screws on the block, as shown in Figures 11 and 12.
The last step is to install the system inside the computer, attaching the block on the CPU and the radiator on the top panel of your case.
Figure 14 shows the main screen of the control software. You can choose one of three operation modes: Extreme, Silent or Custom. We repeated our tests on both Extreme and Silent modes.
- 1. Introduction
- 2. The Thermaltake WATER2.0 Extreme
- 3. The Thermaltake WATER2.0 Extreme (Cont’d)
- 4. Installation
- 5. How We Tested
- 6. Our Tests
- 7. Main Specifications
- 8. Conclusions