SHARE

The Thermaltake WATER2.0 Extreme (Cont’d)

In Figure 6, you can see the cables that come attached to the block. There is one connector that goes on the motherboard CPU fan header, two male connectors where you must plug in the fans, and one USB connector that you must plug in on a free USB header of your motherboard.

Thermaltake WATER2.0 ExtremeFigure 6: Block wires

Figure 7 shows the top of the block.

Thermaltake WATER2.0 ExtremeFigure 7: Block

The base of the block, which is made of copper, is revealed in Figure 8. The thermal compound comes pre-applied.

Thermaltake WATER2.0 ExtremeFigure 8: Base

Figure 9 illustrates the two 120 mm fans that come with the WATER2.0 Extreme. The fans have four pin connectors, which means they are compatible with PWM speed control.

Thermaltake WATER2.0 ExtremeFigure 9: Fans

1
2
3
4
5
6
7
8
Rafael Otto Coelho is a physicist with a master's degree in Education, and is a college professor in Brazil.