[nextpage title=”Introduction”]
Today we tested Thermaltake SpinQ VT CPU cooler, which has a unique design with a centrifugal fan inside a cylindrical heatsink. Will this fancy design translate into a high performance? Let’s see.
The product box is simple, made of card paper with no window or details, as you can see in Figure 1.
Inside the box we found, besides the cooler, installation hardware, user manual and a small tube of thermal compound.
In Figure 2 we can see SpinQ VT. Note the position of the fins: each one is slighty rotated from the one right before it, making an interesting "spinning" looks.
Figure 2: Thermaltake SpinQ VT.
In the next we will see the cooler in details.
[nextpage title=”Thermaltake SpinQ VT”]
In Figure 3 we can see SpinQ VT from the front. Note the cooler is very tall, with a big gap between the base and the heatsink.
In Figure 4 we have a side view of the cooler. It is clear the presence of three 6 mm U-shape heatpipes.
In Figure 5 we have a top view of SpinQ VT. The tips from the heatpipes equidistant along the circle formed by the fins. It is also clear the position of the transparent fan inside the heatsink.
[nextpage title=”Thermaltake SpinQ VT (Cont’d)”]
In Figure 6 we can see the bottom of the fan. It works blowing air from inside the heatsink in all directions.
[nextpage title=”Installation”]
SpinQ VT retention system is quite simple: for AMD processors, you just need to put the appropriate clip over the base of the cooler and attach it to the CPU cooler frame on the motherboard. With Intel CPUs you must screw the proper clips (there is one set for socket LGA775 and another for sockets 1156 and 1366) to the base, and then attach it on top of the processor the same way you do with the Intel stock cooler.
In Figure 9 we can see the hardware that come with the cooler, manuals, one small tube of gray thermal compound and the clip sets.
In Figure 10 we can see the cooler with socket LGA775 clips attached. We thought that a tall and relatively heavy cooler like this deserved a better holding system, with a backplate to avoid the motherboard from bending.
Figure 10: Socket LGA775 clips.
In Figure 11 you can see the cooler installed in our case. As this cooler do not direct airflow to the rear side of the case, it will probably perform better with a good case ventilation. A fan at the rear panel of the case should work nice.
In Figure 12, you can see the red glow of the fan when it is turned on.
[nextpage title=”How We Tested”]
We are adopting the following methodology for our CPU cooler reviews.
First, we chose the CPU with the highest TDP (Thermal Design Power) we had available, a Core 2 Extreme QX6850, which has a 130 W TDP. The choice for a CPU with a high TDP is obvious. To measure the efficiency of the tested cooler, we need a processor that gets very hot. This CPU works by default at 3.0 GHz, but we overclocked it to 3.33 GHz, in order to heat it as much as possible.
We took noise and temperature measurements with the CPU idle and under full load. In order to achieve 100% CPU load on the four processing cores we ran Prime95 with the "In-place Large FFTs" option, and three instances of the StressCPU program, all at the same time.
We also compared the reviewed cooler to the Intel stock cooler (with copper base), which comes with the processor we used, and also with some other coolers we have tested using the same methodology.
Temperature measurements were taken with a digital thermometer, with the sensor touching the base of the cooler, and also with the core temperature reading (given by the CPU therma
l sensor) from the from the SpeedFan program, using an arithmetic average of the four core temperature readings.
The sound pressure level (SPL) was measured with a digital noise meter, with its sensor placed 4" (10 cm) from the fan. We turned off the video board cooler so it wouldn’t interfere with the results, but this measurement is only for comparative purposes, because a precise SPL measurement needs to be made inside an acoustically insulated room with no other noise sources, which is not the case here.
Hardware Configuration
- Processor: Core 2 Extreme QX6850
- Motherboard: Gigabyte EP45-UD3L
- Memory: 2 GB Corsair XMS2 DHX TWIN2X2048-6400C4DHX G (DDR2-800/PC2-6400 with timings 4-4-4-12), running at 800 MHz
- Hard drive: 1 TB Seagate Barracuda 7200.12 (ST31000528AS, SATA-300, 7200 rpm, 32 MB buffer)
- Video card: PNY Verto Geforce 9600 GT
- Video resolution: 1680×1050
- Video monitor: Samsung Syncmaster 2232BW Plus
- Power supply required: Seventeam ST-550P-AM
- Case: 3RSystem K100
Software Configuration
- Windows 7 Home Premium 64 bit
Software Used
Error Margin
We adopted a 2 °C error margin, i.e., temperature differences below 2 °C are considered irrelevant.
[nextpage title=”Our Tests”]
On the tables below you can see our results. We ran the same tests with the coolers shown on below tables. Each test ran with the CPU idle and the with the CPU fully loaded. On BigTyp 14Pro, TMG IA1, NH-U12P and ISGC-300 the tests were done with the fan at full speed and at minimum speed. The other coolers were connected directly to the motherboard and it controls the fan speed based on CPU load level and temperature on PWM models. ISGC-400, iCEAGE Prima Boss, Megahalems Rev. B and Thermaltake SpinQ VT were tested at minimum speed on idle test and at maximum speed on full load test.
CPU Idle |
|||||
Cooler | Room Temp. | Noise | Fan Speed | Base Temp. | Core Temp. |
Intel stock | 14 °C | 44 dBA | 1000 rpm | 31 °C | 42 °C |
BigTyp 14Pro (min) | 17 °C | 47 dBA | 880 rpm | 29 °C | 36 °C |
BigTyp 14Pro (max) | 17 °C | 59 dBA | 1500 rpm | 26 °C | 34 °C |
Akasa Nero | 18 °C | 41 dBA | 500 rpm | 26 °C | 35 °C |
Cooler Master V10 | 14 °C | 44 dBA | 1200 rpm | 21 °C | 26 °C |
TMG IA1 (max) | 16 °C | 47 dBA | 1500 rpm | 22 °C | 30 °C |
TMG IA1 (min) | 16 °C | 57 dBA | 2250 rpm | 21 °C | 30 °C |
Zalman CNPS10X Extreme | 16 °C | 44 dBA | 1200 rpm | 21 °C | 29 °C |
Thermaltake ISGC-100 | 18 °C | 44 dBA | 1450 rpm | 35 °C | 49 °C |
Noctua NH-U12P (low) | 15 °C | 42 dBA | 1000 rpm | 20 °C | 30 °C |
Noctua NH-U12P | 15 °C | 46 dBA | 1400 rpm | 20 °C | 28 °C |
Noctua NH-C12P | 17 °C | 46 dBA | 1400 rpm | 23 °C | 28 °C |
Thermaltake ISGC-200 | 21 °C | 43 dBA | 1100 rpm | 31 °C | 35 °C |
Schythe Kabuto | 22 °C | 42 dBA | 800 rpm | 29 °C | 34 °C |
Arctic Cooling Alpine 11 Pro | 20 °C | 43 dBA | 1500 rpm | 32 °C | 39 °C |
ISGC-300 (min) | 18 °C | 42 dBA | 800 rpm | 26 °C | 30 °C |
ISGC-300 (max) | 18 °C | 46 dBA | 1400 rpm | 24 °C | 26 °C |
SilverStone NT06-E | 21 °C | 66 dBA | 2600 rpm | 30 °C | 41 °C |
Zalman CNPS9700 NT | 22 °C | 48 dBA | 1700 rpm | 28 °C | 35 °C |
Scythe Mugen-2 | 17 °C | 41 dBA | 700 rpm | 25 °C | 30 °C |
ISGC-400 (min) | 17 °C | 44 dBA | 850 rpm | 24 °C | 30 °C |
Cooler Master Vortex 752 | 20 °C | 48 dBA | 1700 rpm | 32 °C | 44 °C |
iCEAGE Prima Boss (min) | 22 °C | 42 dBA | 1000 rpm | 29 °C | 36 °C |
Evercool Buffalo | 17 °C | 51 dBA | 1850 rpm | 22 °C | 29 °C |
Scythe Big Shuriken | 20 °C | 42 dBA | 900 rpm | 31 °C | 39 °C |
Cooler Master Hyper TX3 | 21 °C | 44 dBA | 1700 rpm | 30 °C | 39 °C |
Titan Skalli | 20 °C | 43 dBA | 1200 rpm | 27 °C | 34 °C |
Prolimatech Megahalems Rev. B | 21 °C | 40 dBA | 800 rpm | 28 °C | 32 °C |
Zalman CNPS9900 NT | 23 °C | 45 dBA | 900 rpm | 30 °C | 34 °C |
Cooler Master Hyper N620 | 21 °C | 44 dBA | 1200 rpm | 28 °C | 34 °C |
Nexus LOW-7000 R2 | 23 °C | 46 dBA | 1400 rpm | 33 °C | 42 °C |
Evercool HPK-10025EA | 20 °C | 54 dBA | 1900 rpm | 27 °C | 34 °C |
Evercool HPH-9525EA | 23 °C | 50 dBA | 1900 rpm | 38 °C | 49 °C |
iCEAGE Prima Boss II | 23 °C | 42 dBA | 1000 rpm | 29 °C | 35 °C |
Thermaltake SpinQ VT | 24 °C | 45 dBA | 950 rpm | 32 °C | 39 °C |
CPU Fully Loaded |
|||||
Cooler | Room Temp. | Noise | Fan Speed | Base Temp. | Core Temp. |
Intel stock | 14 °C | 48 dBA | 1740 rpm | 42 °C | 100 °C |
BigTyp 14Pro (min) | 17 °C | 47 dBA | 880 rpm | 43 °C | 77 °C |
BigTyp 14Pro (max) | 17 °C | 59 dBA | 1500 rpm | 35 °C | 70 °C |
Akasa Nero | 18 °C | 48 dBA | 1500 rpm | 34 °C | 68 °C |
Cooler Master V10 | 14 °C | 54 dBA | 1900 rpm | 24 °C | 52 °C |
TMG IA1 (max) | 16 °C | 47 dBA | 1500 rpm | 27 °C | 63 °C |
TMG IA1 (min) | 16 °C | 57 dBA | 2250 rpm | 25 °C | 60 °C |
Zalman CNPS10X Extreme | 16 °C | 51 dBA | 1900 rpm | 24 °C | 50 °C |
Thermaltake ISG-100 | 18 °C | 50 dBA | 1800 rpm | 58 °C | 93 °C |
Noctua NH-U12P (low) | 15 °C | 42 dBA | 1000 rpm | 28 °C | 59 °C |
Noctua NH-U12P | 15 °C | 46 dBA | 1400 rpm | 25 °C | 54 °C |
Noctua NH-C12P | 17 °C | 46 dBA | 1400 rpm | 37 °C | 76 °C |
Thermaltake ISGC-200 | 21 °C | 48 dBA | 1900 rpm | 42 °C | 68 °C |
Scythe Kabuto | 22 °C | 47 dBA | 1200 rpm | 38 °C | 63 °C |
Arctic Cooling Alpine 11 Pro | 20 °C | 51 dBA | 2300 rpm | 49 °C | 85 °C |
ISGC-300 (min) | 18 °C | 42 dBA | 800 rpm | 36 °C | 64 °C |
ISGC-300 (max) | 18 °C | 46 dBA | 1400 rpm | 31 °C | 56 °C |
SilverStone NT06-E | 21 °C | 66 dBA | 2600 rpm | 39 °C | 96 °C |
Zalman CNPS9700 NT | 22 °C | 56 dBA | 2600 rpm | 34 °C | 63 °C |
Scythe Mugen-2 | 17 °C | 46 dBA | 1300 rpm | 28 °C | 54 °C |
ISGC-400 (max) | 17 °C | 47 dBA | 1400 rpm | 36 °C | 69 °C |
Cooler Master Vortex 752 | 20 °C | 55 dBA | 2300 rpm | 48 °C | 92 °C |
iCEAGE Prima Boss (max) | 22 °C | 53 dBA | 2000 rpm | 35 °C | 59 °C |
Evercool Buffalo | 17 °C | 51 dBA | 1850 rpm | 32 °C | 67 °C |
Scythe Big Shuriken | 20 °C | 50 dBA | 1500 rpm | 51 °C | 85 °C |
Cooler Master Hyper TX3 | 21 °C | 53 dBA | 2700 rpm | 39 °C | 66 °C |
Titan Skalli | 20 °C | 47 dBA | 1550 rpm | 37 °C | 69 °C |
Prolimatech Megahalems Rev. B | 21 °C | 61 dBA | 2600 rpm | 30 °C | 51 °C |
Zalman CNPS9900 NT | 23 °C | 56 dBA | 2000 rpm | 34 °C | 54 °C |
Cooler Master Hyper N620 | 21 °C | 50 dBA | 1650 rpm | 32 °C | 56 °C |
Nexus LOW-7000 R2 | 23 °C | 53 dBA | 1900 rpm | 45 °C | 74 °C |
Evercool HPK-10025EA | 20 °C | 54 dBA | 1900 rpm | 39 °C | 69 °C |
Evercool HPH-9525EA | 23 °C | 50 dBA | 1900 rpm | 58 °C | 100 °C |
iCEAGE Prima Boss II | 23 °C | 56 dBA | 2100 rpm | 32 °C | 56 °C |
Thermaltake SpinQ VT | 24 °C | 52 dBA | 1500 rpm | 40 °C | 68 °C |
The next graph shows how many degrees Celsius the CPU core was hotter than room temperature during our idle tests.
The next graph gives you an idea on how many degrees Celsius the CPU core was hotter than room temperature during our full load tests.
[nextpage title=”Main Specifications”]
Thermaltake SpinQ VT main features are:
- Application: Socket LGA775, 1156, 1366, AM3, AM2+, AM2, 940, 939 and 754 processors.
- Fins: Aluminum.
- Base: Copper.
- Heat-pipes: Three U-shape 6-mm copper heat-pipes.
- Fan: radial, 80 mm.
- Nominal fan speed: 1,600 rpm.
- Fan air flow: 86.5 cfm.
- Maximum power consumption: 5.4 W.
- Nominal noise level: 28 dBA.
- Weight: 1.1 lbs (495 g).
- More information: https://www.thermaltakeusa.com
- Average price in the US*: USD 56.00
* Researched at Newegg.com on the day we published this First Look article.[nextpage title=”Conclusions”]
Thermaltake SpinQ VT CPU cooler impressed us with its looks. It has a very unique and cool design, and will surely draw attention in any computer with a transparent side window. Its fan is also pretty quiet.
It performed well, although it is not a top-performing cooler. And it is not an inexpensive product.
If you are looking for a budget cooler with the best possible performance, forget this cooler. However if you want a really nice and different-looking CPU cooler, quiet and with a good performance, Thermaltake SpinQ VT is an excellent choice.
Leave a Reply