[nextpage title=”Introduction”]
Following up on our Thermal Compound Roundup – November 2011 review, we are adding five more thermal compounds to our roundup, for a total of 55 different models from Akasa, Antec, Arctic Cooling, Arctic Silver, Biostar, Coollaboratory, Cooler Master, Coolink, Deepcool, Dow Corning, Enermax, Evercool, EVGA, Gelid, Glacialstars, Innovation Cooling, Masscool, Nanoxia, Nexus, Noctua, Phobya, Prolimatech, Scythe, Shin-Etsu, Spire, StarTech, Revoltec, Rosewill, Thermalright, Thermaltake, TIM Consultants, Titan, Tuniq, Xigmatek, Zalman, and ZEROtherm. In this review, we will determine if certain products are superior to others. We will also try another “bread topping” thermal compound to see if it works.
For a better understanding of how thermal compound (a.k.a. thermal grease or thermal paste) works and how to correctly apply it, please read our How to Correctly Apply Thermal Grease tutorial and our article What is the Best Way to Apply Thermal Grease? The most important concept that you must understand is that it is a mistake to think that the more thermal grease you apply, the better. The thermal compound is a worse heat conductor than copper and aluminum (the metals usually found on cooler bases). So, if you apply more thermal compound than necessary, it will actually lower the cooling performance instead of raising it.
Figure 1 shows the five new thermal compounds that we are adding to our roundup.
Figure 1: The new thermal compounds included in this roundup
Let’s get a closer look at the new contenders in the next pages.
[nextpage title=”The Thermal Compounds”]
We will now examine the five new thermal compounds that we are including in our roundup.
Figure 2 illustrates the Innovation Cooling (IC) Diamond 24 Carat gray thermal compound.
The Nanoxia Heat Buster gray compound is shown in Figure 3.
Figures 4 and 5 present the Masscool Fanner-420 white thermal compound.
[nextpage title=”The Thermal Compounds (Cont’d)”]
In Figures 6 and 7, you can see the Revoltec Thermal Grease Nano gray thermal compound, which comes in a nail polish-like tube.
Figure 6: Revoltec Thermal Grease Nano
Figure 7: Revoltec Thermal Grease Nano
Figures 8 and 9 reveal the last “true” thermal compound of today: the Thermaltake TG-2 gray compound.
After discovering that mayonnaise and butter can be used as a thermal compound, several readers suggested that we try cream cheese, so we applied some Philadelphia Cream Cheese on our CPU.
Figure 10: Philadelphia Cream Cheese
For a detailed look at the other thermal compounds included in this roundup, please read our “Thermal Compound Roundup – November 2011” review.
[nextpage title=”How We Tested”]
We tested the thermal compounds using the same testbed system that we currently use to test CPU coolers, which is fully described below. Our Core i7-860 (quad-core, 2.8 GHz) CPU, which is a socket LGA1156 processor with a 95 W TDP (Thermal Design Power), was overclocked to 3.3 GHz (150 MHz base clock and 22x multiplier), and we kept the standard core voltage (Vcore). We used a Zalman CNPS9900 MAX CPU cooler. The only different part in each test was the thermal compound itself.
We measured temperature with the CPU under full load. In order to get 100% CPU usage in all threads, we ran Prime 95 25.11 (in this version, the software uses all available threads) with the “In-place Large FFTs” option. For each test, we applyied the same quantity of thermal compound (about the size of a grain of rice) at the center of the CPU, as shown in Figure 11.
Figure 11: Applying thermal compound
After each test, we checked the base of the cooler, making sure the quantity of thermal compound was optimal. The thermal compound must be spread evenly on the metallic part of the CPU, without exceeding it, creating 
;a thin layer. The “fingerprint” shown in Figure 12 illustrates that the compound was properly applied.
Figure 12: CPU “fingerprint,” showing the thermal compound was correctly applied
Room temperature measurements were taken with a digital thermometer. The core temperature was read with the SpeedFan program (available from the CPU thermal sensors), using an arithmetic average of the core temperature readings. During the tests, the left panel of the case was open.
We also tested the system with no thermal compound on the CPU.
Hardware Configuration
- Processor: Core i7-860
- CPU Cooler: Zalman CNPS9900 MAX
- Motherboard: Gigabyte P55A-UD6
- Memory: 2 GB Markvision (DDR3-1333/PC3-10700 with 9-9-9-22 timings), configured at 1,200 MHz
- Hard disk: Seagate Barracuda XT 2 TB
- Video card: Point of View GeForce GTX 460
- Power supply: Seventeam ST-550P-AM
- Case: 3RSystem L-1100 T.REX Cool
Operating System Configuration
- Windows 7 Home Premium 64 bit
Software Used
Error Margin
Since both room temperature and core temperature readings have 1 °C resolution, we adopted a 2 °C error margin, meaning temperature differences below 2 °C are considered irrelevant.
[nextpage title=”Our Tests”]
The table below presents the results of our measurements.
Thermal Compound | Room Temp. | Core Temp. | Difference |
No Thermal Compound | 26 °C | 88 °C | 62 °C |
Zalman ZM-STG2 | 24 °C | 59 °C | 35 °C |
Prolimatech Thermal Compound | 24 °C | 56 °C | 32 °C |
Cooler Master Thermal Compound Kit | 23 °C | 58 °C | 35 °C |
Evercool EC420-TU15 | 22 °C | 57 °C | 35 °C |
Spire Bluefrost | 22 °C | 58 °C | 36 °C |
Gelid GC Extreme | 26 °C | 61 °C | 35 °C |
Coolink Chillaramic | 26 °C | 61 °C | 35 °C |
Deepcool Z9 | 26 °C | 61 °C | 35 °C |
Noctua NT-H1 | 26 °C | 61 °C | 35 °C |
Thermalright The Chill Factor | 26 °C | 63 °C | 37 °C |
Antec Thermal Grease | 24 °C | 58 °C | 34 °C |
Arctic Silver 5 | 24 °C | 57 °C | 33 °C |
Arctic Silver Céramique | 24 °C | 57 °C | 33 °C |
Biostar Nano Diamond | 22 °C | 57 °C | 35 °C |
Xigmatek PTI-G3606 | 22 °C | 55 °C | 33 °C |
Antec Formula 7 | 21 °C | 55 °C | 34 °C |
Arctic Cooling MX-4 | 21 °C | 56 °C | 35 °C |
Cooler Master High Performance | 22 °C | 56 °C | 34 °C |
Thermaltake Thermal Compound | 21 °C | 54 °C | 33 °C |
Tuniq TX-3 | 22 °C | 54 °C | 32 °C |
Shin-Etsu MicroSi | 14 °C | 49 °C | 35 °C |
Scythe Thermal Elixer Scyte-1000 | 14 °C | 49 °C | 35 °C |
Titan Connoisseur Platinum Grease | 14 °C | 49 °C | 35 °C |
Evercool Cruise Missile STC-03 | 14 °C | 49 °C | 35 °C |
Rosewill RCX-TC001 | 14 °C | < font size="1">53 °C | 39 °C |
Pink Lipstick | 14 °C | 54 °C | 40 °C |
Arctic Silver Matrix | 12 °C | 50 °C | 38 °C |
Evercool T-grease 800 | 13 °C | 49 °C | 36 °C |
Gelid GC-2 | 13 °C | 50 °C | 37 °C |
Prolimatech PK-1 | 13 °C | 47 °C | 34 °C |
Tuniq TX-4 | 12 °C | 48 °C | 36 °C |
Toothpaste | 13 °C | 53 °C | 40 °C |
Toothpaste (12 h after) | 13 °C | 56 °C | 43 °C |
Cooler Master ThermalFusion 400 | 13 °C | 47 °C | 34 °C |
Evercool Deep Bomb | 13 °C | 47 °C | 34 °C |
TIM Consultants Thermal Grease | 13 °C | 48 °C | 35 °C |
Dow Corning TC-1996 | 13 °C | 49 °C | 36 °C |
Nexus TMP-1000 | 13 °C | 50 °C | 37 °C |
Spray oil | 13 °C | 53 °C | 40 °C |
Akasa 450 | 14 °C | 50 °C | 36 °C |
Enermax (Dow Corning TC-5121) | 14 °C | 47 °C | 33 °C |
GlacialStars IceTherm II | 14 °C | 49 °C | 35 °C |
Rosewill RCX-TC060PRO | 14 °C | 56 °C | 42 °C |
Titan Royal Grease | 14 °C | 52 °C | 38 °C |
Chocolate | 14 °C | 89 °C | 75 °C |
Arctic Silver Céramique 2 | 13 °C | 48 °C | 35 °C |
Akasa 455 | 13 °C | 49 °C | 36 °C |
Masscool G751 | 13 °C | 49 °C | 36 °C |
Thermaltake TG-1 | 13 °C | 47 °C | 34 °C |
ZEROtherm ZT-100 | 13 °C | 51 °C | 38 °C |
Mayonnaise | 13 °C | 48 °C | 35 °C |
Coollaboratory LIQUID Ultra | 18 °C | 52 °C | 34 °C |
EVGA Frostbyte | 18 °C | 56 °C | 38 °C |
IC Diamond 7 Carat | 18 °C | 53 °C | 35 °C |
Phobya HeGrease Extreme | 18 °C | 52 °C | 34 °C |
StarTech Heatgrease10 | 18 °C | 54 °C | 36 °C |
Butter | 18 °C | 58 °C | 40 °C |
Butter (12 h later) | 19 °C | 61 °C | 42 °C |
IC Diamond 24 Carat | 24 °C | 58 °C | 34 °C |
Nanoxia Heat Buster | 24 °C | 58 °C | 34 °C |
Masscool Fanner-420 | 24 °C | 62 °C | 38 °C |
Revoltec Thermal Grease Nano | 24 °C | 60 °C | 36 °C |
Thermaltake TG-2 | 24 °C | 62 °C | 38 °C |
Cream Cheese | 24 °C | 61 °C | 37 °C |
Cream Cheese (12 h later) | 22 °C | 62 °C | 40 °C |
In the following graph, at full load you can see how many degrees Celsius hotter the CPU core is than the air outside the case. The lower this difference, the better is the performance of the thermal compound. The red bars refer to the compounds included in this batch.
[nextpage title=”Conclusions”]
From the group of thermal compounds we tested this month, the Nanoxia Heat Buster and the IC Diamond 24 Carat presented excellent performance in our system.
On the other hand, the Philadelphia Cream Cheese didn’t reach the performance shown by mayonnaise, but it wasn’t bad at all, cooling our CPU better than the other alternative thermal compounds we tested and even being better than some “real” products, at least for the first minutes of use.
Leave a Reply