The Spire TME III
Figure 4 illustrates the front of the cooler, which is covered by the 120 mm fan. Notice the small auxiliary heatsink over the base, which was also present on older versions of the product.
Figure 5 reveals the side of the cooler. The fins are folded, creating a closed surface.
Figure 6 shows the rear of the cooler, where the second fan goes.
In Figure 7, you can see the top of the cooler, where the tips of the heatpipes are visible. Please notice that the fins are not plain, but have some kind of rugosity.
- 1. Introduction
- 2. The Spire TME III
- 3. The Spire TME III (Cont’d)
- 4. Installation
- 5. How We Tested
- 6. Our Tests
- 7. Main Specifications
- 8. Conclusions