The Scythe Ninja3 (Cont’d)
In Figure 7 you see how the eight heatpipes are distributed in the base of the cooler. As already explained, the eight heatpipes are divided in two groups with four heatpipes each, and each group is installed perpendicular to each other.
In Figure 8 you see the mirrored finish of the base of the cooler.
The fan that comes with Ninja3 have PWM automatic control, but it also has a potentiometer, where you can adjust the fan speed.
In Figure 10, you can see the fan installed. It is held in place by two wire clips.
- 1. Introduction
- 2. The Scythe Ninja3
- 3. The Scythe Ninja3 (Cont’d)
- 4. Installation
- 5. How We Tested
- 6. Our Tests
- 7. Main Specifications
- 8. Conclusions