The Scythe Ninja3
In Figure 4, you see the front of the heatsink. The fins are thick, firm, and well spaced.
In Figure 5, you see the side of the cooler. The eight heatpipes are divided into two groups of four heatpipes and each group is installed perpendicular to each other.
In Figure 6, you see the top of the cooler. The shape of the fins may make you think that the heatsink is divided into four pieces, but this isn’t the case, as the fins are not independent. There is a nice tribal decoration on the top fin.
- 1. Introduction
- 2. The Scythe Ninja3
- 3. The Scythe Ninja3 (Cont’d)
- 4. Installation
- 5. How We Tested
- 6. Our Tests
- 7. Main Specifications
- 8. Conclusions