Media type that can be recorded and re-recorded by end users with a storage capacity of 650 MB, bringing the same level of convenience as floppy disks. Also called CD-E (CD Erasable). CD-RW recording is done through a CD-RW recorder, also known as "CD-RW burner".

The disc is manufactured using a photosensitive material that changes its chemical and physical characteristics accordingly to the temperature. This technology is called phase-change.

CD-RW discs have six layers: the phase-change material uses four layers, on top of them we have a plastic substrate layer and then a lacquer layer. The photosensitive material is made of four chemical elements: silver, antimony, tellurium and indium. The fusion temperature for liquid state is around 600º C and fusion temperature for solid state is around 200º C.

On a CD-RW, the pits and lands found on a regular CD are represented with the physical state of the organic material:

Solid state = translucid = lands
Liquid state = opaque = pits

Since the recording and erasing processes of CD-RW are done using heat, you should avoid letting your discs face light and heat sources, like the sunlight.

In order to read CD-RW discs, CD-ROM units must have a circuit called AGC (Automatic Gain Control). Older CD-ROM units don’t have this circuit, thus they cannot read CD-RW media. This happens because the reflection ratio (the amount of laser light that bounces reflects back after hitting a reflecting point) of CD-RW media is far lower than commercial CDs (“silver” CDs) and CD-R. While commercial CDs have a reflection ratio of 70% and CD-R 65%, on CD-RW only 20% of the laser light reflects back when it strikes a reflection point.

Total or partial reproduction of the contents of this site, as well as that of the texts available for downloading, be this in the electronic media, in print, or any other form of distribution, is expressly forbidden. Those who do not comply with these copyright laws will be indicted and punished according to the International Copyrights Law.

We do not take responsibility for material damage of any kind caused by the use of information contained in Hardware Secrets.