Basic Input Output System

Program that "teaches" the system processor how to operate with PC basic devices such as video in text mode, hard disks and floppy disk drives.

This program is stored insed the system ROM memory, which is physically located on the system motherboard. Because of that a lot of people start calling the ROM memory of the computer as "BIOS", even though technically this is wrong.

Inside the ROM memory there are three programs stored: BIOS, POST and setup. POST (Power On Self Test) is a self-test run every time the computer is turned on (memory counting, etc). Setup is the system configuration utility and is thru it that we configure the hard disk type and other several hardware-related configuration options.

In the same manner a lot of people confuses "ROM" with "BIOS", the majority of people call the setup program as "BIOS" as well, while setup and BIOS are two different programs.

In summary, BIOS is a program stored inside the PC's ROM memory (which is a chip). Setup and POST are two other programs that are stored in the same chip.

On the pictures below we see the PC's ROM memory chip, which people call "BIOS" - while in reality BIOS is one of the three programs stored inside this chip, as we explained.

Figure 1: ROM memory chip. A lot of people call it "BIOS" while BIOS is one of the three programs stored inside this chip.

Figure 2: Another example of ROM memory chip.

Total or partial reproduction of the contents of this site, as well as that of the texts available for downloading, be this in the electronic media, in print, or any other form of distribution, is expressly forbidden. Those who do not comply with these copyright laws will be indicted and punished according to the International Copyrights Law.

We do not take responsibility for material damage of any kind caused by the use of information contained in Hardware Secrets.