SilverStone Fortress FT01 Case Review
By Gabriel Torres on January 2, 2009


Introduction

Hardware Secrets Golden Award

FT01 is a high-quality all-aluminum mid-tower case from SilverStone, targeted to the very exigent user. Its superior quality is achieved by using a “unibody” chassis, i.e., the top, front and bottom panels of the case are made by a single aluminum sheet (very thick, by the way) that was bent using automotive-level press machines, a concept that was introduced by the Tejmin TJ07 case from the same manufacturer. Let’s explore all the features from this case.

Fortress FT01 is available in two colors, black or silver, and with or without a transparent side window. We reviewed the black version with a transparent side window.

SilverStone Fortress FT01 case
click to enlarge
Figure 1: SilverStone Fortress FT01 case.

SilverStone Fortress FT01 case
click to enlarge
Figure 2: SilverStone Fortress FT01 case.

In Figure 3, you can see its front panel – this case has no door. It has five 5.25” external bays and this case does not come with any 3.5” adapter, so you can’t install directly floppy disk drives or memory card readers to this case (SilverStone sells this adapter separately, called FP51).

This case has three fans, one of them (180 mm with 170-mm blades, 700 rpm) located on the front panel, cooling down the hard disk drive bays. This fan has a washable dust filter, accessible from inside the case (we will talk more about this component later). Fortress FT01 doesn’t come with a speed controller for its fans, but all fans use three-pin power plugs, allowing you to install them on your motherboard and thus monitor their speed.

SilverStone Fortress FT01 case
click to enlarge
Figure 3: Front panel.

The small panel containing the audio and USB connectors is located on the top of the case. This case comes with one FireWire port and two USB ports. The two USB ports are far away from each other, allowing you to install two “fat” USB devices at the same time. A case with this construction quality deserved one eSATA port.

SilverStone Fortress FT01 case
click to enlarge
Figure 4: Available connectors.

The rear panel from FT01 can be seen in Figure 5. The power supply must be installed on the lower section of the case. This case has seven expansion slots, one 120 mm fan on the rear (900 rpm) and two holes for the hoses of an external water cooling solution, which use rubber covers to protect them, so you won’t need to drill or break anything on this case if you want to have such solution.

Fortress FT01 has some interesting details on its rear panel: it uses meshed slot covers, which improves the airflow inside the case; it has a special place (a special hole between the rear fan and the mesh on top of the expansion slots) for installing SilverStone SST-CLEARCMOS product, which is a button for clearing the CMOS memory – usually this product needs to be installed on an empty slot, so you save one slot here –; and two hooks for you to install padlocks to avoid unauthorized people from opening your case or for installing a warranty seal. These hooks also act as levers to remove the side panels.

SilverStone Fortress FT01 case
click to enlarge
Figure 5: Rear panel.

The side panels are fastened to the case using thumbscrews, which is always nice.

Now let’s take a look inside Fortress FT01.

Inside Fortress FT01

Before talking about the internals of FT01, we should talk about the side panels. They are made of aluminum and SilverStone added foam on them to reduce the noise level produced by the PC.

SilverStone Fortress FT01 case
click to enlarge
Figure 6: Left side panel.

SilverStone Fortress FT01 case
click to enlarge
Figure 7: Right side panel.

In Figure 8 we can have an overall look inside SilverStone Fortress FT01. Even though we can remove the right panel the motherboard tray is permanently attached to the chassis.

SilverStone Fortress FT01 case
click to enlarge
Figure 8: Inside Fortress FT01.

The top fan, like the front fan, measures 180 mm (170-mm blades, 700 rpm) and also has a washable dust filter. As already mentioned, all fans use a three-pin power connector and no speed controller is available.

This case doesn’t come with any screwless mechanism to hold daughterboards. We think that a case with this quality should have come with thumbscrews here.

SilverStone Fortress FT01 case
click to enlarge
Figure 9: Top and rear fans and expansion slots.

SilverStone is promoting this case as a “positive air pressure” product, which means that the amount of airflow entering the case is greater than the amount exiting. SilverStone has posted a very interesting video on YouTube showing the airflow on Fortress FT01.

Inside Fortress FT01 (Contíd )

The reviewed case has a dust filter for the power supply, which must be installed with its fan facing down. This filter, however, must be unscrewed to be washed, contrary to what happens to the other dust filters available on this case, which can be easily removed using your hands.

SilverStone Fortress FT01 case
click to enlarge
Figure 10: Dust filter for the power supply.

In Figure 11 we show the dust filter from the front fan, which is accessible from inside the case only.

SilverStone Fortress FT01 case
click to enlarge
Figure 11: Dust filter for the front fan.

If you have very long video cards (12,” i.e., 30 cm) you can remove the top hard disk drive cage, see Figure 12. In this case you lose four hard disk drive bays.

SilverStone Fortress FT01 case
click to enlarge
Figure 12: You can remove the top hard disk drive cage for installing 12” (30 cm) video cards.

Now let’s take an in-depth look at the disk drive options from the reviewed case.

The Disk Drive Bays

This case has five external 5.25” bays and, as already explained, you need to buy an adapter if you want to install a floppy disk drive or a 3.5” memory card reader, as this case doesn’t come with the necessary adapter. The 5.25” bays use a very good screwless mechanism.

This case comes with seven 3.5” hard disk drive bays, divided into two cages, the top one with four bays and the bottom one with three bays.

SilverStone Fortress FT01 case
click to enlarge
Figure 13: Disk drive bays.

Each bay is in fact a small drawer, as you can see in Figure 14. The hard disk installation does not require any screw (the drive enters very tight in the drawer), but you can add screws if you want. Each drawer has four rubber rings to prevent the noise produced by the hard disk drive from propagating to the rest of the chassis, what would amplify this noise.

SilverStone Fortress FT01 case
click to enlarge
Figure 14: Hard drive bays.

The top hard drive bay comes with a hot swap connector, allowing you to install a hard disk drive without the need to attach cables directly to it. This case comes with only one connector, so if you want other bays to have this feature you will need to buy additional connectors from SilverStone (called CP05).

SilverStone Fortress FT01 case
click to enlarge
Figure 15: Hot swap connectors.

Main Specifications

SilverStone Fortress FT01 case main specs include:

* Researched at Froogle.com on the day we published this review.

Conclusions

SilverStone Fortress FT01 is a mid-tower case targeted to the exigent user that wants a high-quality all-aluminum case. Here is a summary of what we found about this product.

Strong Points

Weak Points

In summary, we think this is a terrific product for the exigent user that is willing to pay more to have a top-notch case. The quality from FT01 is really outstanding and we’ve only seen this kind of quality before on aluminum cases above USD 300. Average users, however, may want to look into different products, like Lian Li PC-7F, which is also an all-aluminum product but costing USD 70 less.

Originally at http://www.hardwaresecrets.com/article/SilverStone-Fortress-FT01-Case-Review/675


© 2004-13, Hardware Secrets, LLC. All Rights Reserved.

Total or partial reproduction of the contents of this site, as well as that of the texts available for downloading, be this in the electronic media, in print, or any other form of distribution, is expressly forbidden. Those who do not comply with these copyright laws will be indicted and punished according to the International Copyrights Law.

We do not take responsibility for material damage of any kind caused by the use of information contained in Hardware Secrets.