Prolimatech Megahalems Red Series CPU Cooler Review
By Rafael Otto Coelho on March 15, 2013


Introduction

Hardware Secrets Silver Award

This time we are testing the Prolimatech Megahalems Red Series, a CPU cooler with tower heatsink and six U-shaped heatpipes that supports one or two 120 mm or 140 mm fans. Check it out!

Some years ago, we tested the Megahalems Rev. B. Nowadays, Prolimatech offers the Megahalems Rev. C (silver-look heatsink), Megahalems Black Series, Megahalems Blue Series, and the Megahalems Red Series that we are testing. Aside from the aesthetics of the heatsink, they also differ because Rev. C and Black Edition models fit both AMD and Intel processors, while Red Series and Blue Series are compatible with Intel CPUs only.

Figure 1 shows the box of the Megahalems Red Series.

Prolimatech Megahalems Red Series
click to enlarge
Figure 1: Package

Figure 2 shows the contents of the box: heatsink, a syringe of PK-2 thermal compound, a manual, and installation hardware. This cooler does not come with any fan.

Prolimatech Megahalems Red Series
click to enlarge
Figure 2: Accessories

Figure 3 displays both the Megahalems Red Series and Blue Series. The only difference is the color, which is anodized on the heatsink.

Prolimatech Megahalems Red Series
click to enlarge
Figure 3: Megahalems Blue and Red Series

This cooler is discussed in detail in the following pages.

The Megahalems Red Series

Figure 4 illustrates the front of the Megahalems Red Series. You will notice that, in fact, there are two independent heatsinks, one connected to each side of the heatpipes.

Prolimatech Megahalems Red Series
click to enlarge
Figure 4: Front view

Figure 5 reveals the side of the cooler, where you can see the six heatpipes going to the base.

Prolimatech Megahalems Red Series
click to enlarge
Figure 5: Side view

Figure 6 shows a top view of the cooler. The top fins are black, and there are caps at the tips of the heatpipes.

Prolimatech Megahalems Red Series
click to enlarge
Figure 6: Top view

The Megahalems Red Series (Cont’d)

Figure 7 shows the view of the base of the cooler. There is a plate of nickel-plated copper soldered to the heatpipes, and the surface is smooth but with no mirror-like look.

Prolimatech Megahalems Red Series
click to enlarge
Figure 7: Base

We tested the Megahalems Red Edition with one Prolimatech Vortex Fan Aluminum Series, shown in Figure 8. This is a 140 mm fan with aluminum blades, with 1,600 rpm nominal speed, airflow of 127 cfm, 28 dBA noise level, and 5.4 W of power consumption.

Prolimatech Megahalems Red Series
click to enlarge
Figure 8: Fan

Figure 9 unveils the Megahalems Red Series with the fan installed.

Prolimatech Megahalems Red Series
click to enlarge
Figure 9: Fan installed

Installation

Figure 10 shows the backplate for use with Intel sockets LGA775, LGA1155, LGA1156, and LGA1366 processors, with the nuts installed. LGA2011 CPUs use the stock backplate. As previously mentioned, the reviewed cooler is not compatible with AMD CPUs.

Prolimatech Megahalems Red Series
click to enlarge
Figure 10: Backplate

Install the backplate on the solder side of the motherboard, and then the four spacers on the component side. Then put the two metal bars shown in Figure 11, holding them with four thumbnuts.

Prolimatech Megahalems Red Series
click to enlarge
Figure 11: Metal bars installed

Put the heatsink over the CPU, and hold it in place with a third bar, fastening two screws at the first bars.

Prolimatech Megahalems Red Series
click to enlarge
Figure 12: Heatsink installed

The last step is to install the fan or fans.

Prolimatech Megahalems Red Series
click to enlarge
Figure 13: Installation finished

How we tested

We tested the cooler with a Core i5-2500K CPU (quad-core, 3.3 GHz), which is a socket LGA1155 processor with a 95 W TDP (Thermal Design Power). In order to get higher thermal dissipation, we overclocked it to 4.0 GHz (100 MHz base clock and x40 multiplier), with 1.3 V core voltage (Vcore). This CPU was able to reach 4.8 GHz with its default core voltage, but at this setting, the processor enters thermal throttling when using mainstream coolers, reducing the clock and thus the thermal dissipation. This could interfere with the temperature readings, so we chose to maintain a moderate overclocking.

We measured noise and temperature with the CPU under full load. In order to get 100% CPU usage in all cores, we ran Prime 95 25.11 with the “In-place Large FFTs” option. (In this version, the software uses all available threads.)

We compared the tested cooler to other coolers we already tested, and to the stock cooler that comes with the Core i5-2500K CPU. Note that the results cannot be compared to measures taken on a different hardware configuration, so we retested some “old” coolers with this new methodology. This means you can find different values in older reviews than the values you will read on the next page. Every cooler was tested with the thermal compound that comes with it.

Room temperature measurements were taken with a digital thermometer. The core temperature was read with the SpeedFan program (available from the CPU thermal sensors), using an arithmetic average of the core temperature readings.

During the tests, the panels of the computer case were closed. The front and rear case fans were spinning at minimum speed in order to simulate the “normal” cooler use on a well-ventilated case. We assume that is the common setup used by a cooling enthusiast or overclocker.

The sound pressure level (SPL) was measured with a digital noise meter, with its sensor placed near the top opening of the case. This measurement is only for comparison purposes, because a precise SPL measurement needs to be made inside an acoustically insulated room with no other noise sources, which is not the case here.

Hardware Configuration

Operating System Configuration

Software Used

Error Margin

We adopted a 2°C error margin, meaning temperature differences below 2°C are considered irrelevant.

Our Tests

The table below presents the results of our measurements. We repeated the same test on all coolers listed below. Each measurement was taken with the CPU at full load. In the models with a fan supporting PWM, the motherboard controlled the fan speed according to core load and temperature. On coolers with an integrated fan controller, the fan was set at the full speed.

Cooler Room Temp. Noise Speed Core Temp. Temp. Diff.
Cooler Master Hyper TX3 18 °C 50 dBA 2850 rpm 69 ºC 51 °C
Corsair A70 23 °C 51 dBA 2000 rpm 66 ºC 43 °C
Corsair H100 26 °C 62 dBA 2000 rpm 64 ºC 38 °C
EVGA Superclock 26 °C 57 dBA 2550 rpm 67 ºC 41 °C
NZXT HAVIK 140 20 °C 46 dBA 1250 rpm 65 ºC 45 °C
Thermalright True Spirit 120 26 °C 42 dBA 1500 rpm 82 °C 56 °C
Zalman CNPS12X 26 °C 43 dBA 1200 rpm 71 °C 45 °C
Zalman CNPS9900 Max 20 °C 51 dBA 1700 rpm 62 °C 42 °C
Titan Fenrir Siberia Edition 22 °C 50 dBA 2400 rpm 65 °C 43 °C
SilenX EFZ-120HA5 18 °C 44 dBA 1500 rpm 70 °C 52 °C
Noctua NH-L12 20 °C 44 dBA 1450 rpm 70 °C 50 °C
Zalman CNPS8900 Extreme 21 °C 53 dBA 2550 rpm 71 °C 50 °C
Gamer Storm Assassin 15 °C 48 dBA 1450 rpm 58 °C 43 °C
Deepcool Gammaxx 400 15 °C 44 dBA 1500 rpm 60 °C 45 °C
Cooler Master TPC 812 23 °C 51 dBA 2350 rpm 66 °C 43 °C
Deepcool Gammaxx 300 18 °C 43 dBA 1650 rpm 74 °C 56 °C
Intel stock cooler 18 °C 41 dBA 2000 rpm 97 °C 79 °C
Xigmatek Praeton 19 °C 52 dBA 2900 rpm 83 °C 64 °C
Noctua NH-U12P SE2 18 °C 42 dBA 1300 rpm 69 °C 51 °C
Deepcool Frostwin 24 °C 46 dBA 1650 rpm 78 °C 54 °C
Thermaltake Frio Advanced 13 °C 56 dBA 2000 rpm 62 °C 49 °C
Xigmatek Dark Knight Night Hawk Edition 9 °C 48 dBA 2100 rpm 53 °C 44 °C
Thermaltake Frio Extreme 21 °C 53 dBA 1750 rpm 59 °C 38 °C
Noctua NH-U9B SE2 12 °C 44 dBA 1700 rpm 64 °C 52 °C
Thermaltake WATER2.0 Pro 15 °C 54 dBA 2000 rpm 52 °C 37 °C
Deepcool Fiend Shark 18 °C 45 dBA 1500 rpm 74 °C 56 °C
Arctic Freezer i30 13 °C 42 dBA 1350 rpm 63 °C 50 °C
Spire TME III 8 °C 46 dBA 1700 rpm 70 °C 62 °C
Thermaltake WATER2.0 Performer 11 °C 54 dBA 2000 rpm 49 °C 38 °C
Arctic Alpine 11 PLUS 11 °C 45 dBA 2000 rpm 82 °C 71 °C
be quiet! Dark Rock 2 10 °C 41 dBA 1300 rpm 58 °C 48 °C
Phanteks PH-TC14CS 16 °C 47 dBA 1300 rpm 58 °C 42 °C
Phanteks PH-TC14PE 16 °C 48 dBA 1300 rpm 57 °C 41 °C
SilverStone HE01 (Q) 19 °C 44 dBA 1150 rpm 63 °C 44 °C
SilverStone HE01 (P) 20 °C 57 dBA 2050 rpm 62 °C 42 °C
Thermaltake WATER2.0 Extreme (S) 17 °C 44 dBA 1250 rpm 52 °C 35 °C
Thermaltake WATER2.0 Extreme (E) 17 °C 53 dBA 1900 rpm 50 °C 33 °C
Deepcool Neptwin 11 °C 46 dBA 1500 rpm 56 °C 45 °C
SilverStone HE02 19 °C 49 dBA 2000 rpm 64 °C 45 °C
Zalman CNPS9900DF 23 °C 45 dBA 1400 rpm 68 °C 45 °C
Deepcool ICE BLADE PRO V2.0 22 °C 43 dBA 1500 rpm 67 °C 45 °C
Phanteks PH-TC90LS 24 °C 47 dBA 2600 rpm 95 °C 71 °C
Rosewill AIOLOS 20 °C 40 dBA 1600 rpm 94 °C 74 °C
Corsair H60 20 °C 49 dBA 2000 rpm 64 °C 44 °C
Zalman LQ310 27 °C 51 dBA 2050 rpm 65 °C 38 °C
Noctua NH-L9i 24 °C 44 dBA 2500 rpm 95 °C 71 °C
NZXT Respire T40 20 °C 45 dBA 1850 rpm 76 °C 56 °C
NZXT Respire T20 21 °C 45 dBA 1900 rpm 77 °C 56 °C
Zalman LQ315 20 °C 52 dBA 1950 rpm 57 °C 37 °C
Corsair H80i (Quiet) 19 °C 44 dBA 1100 rpm 61 °C 42 °C
Corsair H80i (Maximum) 19 °C 57 dBA 2500 rpm 55 °C 36 °C
NZXT Kraken X40 (Silent) 25 °C 44 dBA 1050 rpm 66 °C 41 °C
NZXT Kraken X40 (Extreme) 25 °C 53 dBA 1650 rpm 62 °C 37 °C
Zalman LQ320 20 °C 52 dBA 2100 rpm 57 °C 37 °C
Corsair H100i (Quiet) 22 °C 45 dBA 1150 rpm 58 °C 36 °C
Corsair H100i (Maximum) 22 °C 61 dBA 2500 rpm 54 °C 32 °C
NZXT Kraken X60 (Silent) 26 °C 46 dBA 1000 rpm 62 °C 36 °C
NZXT Kraken X60 (Extreme) 26 °C 60 dBA 1650 rpm 60 °C 34 °C
Prolimatech Genesis Black Series 25 °C 46 dBA 1150 rpm 69 °C 44 °C
Phanteks PH-TC12DX 25 °C 51 dBA 1850 rpm 74 °C 49 °C
Corsair H90 23 °C 51 dBA 1550 rpm 61 °C 38 °C
Corsair H110 27 °C 58 dBA 1500 rpm 60 °C 33 °C
Evercool Venti 23 °C 49 dBA 2250 rpm 72 °C 49 °C
Thermalright Archon SB-E X2 22 °C 45 dBA 1400 rpm 68 °C 46 °C
Scythe Kabuto II 20 °C 41 dBA 1450 rpm 67 °C 47 °C
Prolimatech Megahalems Red Series 20 °C 51 dBA 1500 rpm 63 °C 43 °C

In the graph below, you can see how many degrees Celsius hotter the CPU core is than the air outside the case. The lower this difference, the better is the performance of the cooler.

Prolimatech Megahalems Red Series

In the graph below, you can see how many decibels of noise each cooler makes.

Prolimatech Megahalems Red Series

Main Specifications

The main specifications for the Prolimatech Megahalems Red Series CPU cooler include:

* Researched at Newegg.com on the day we published this review.

Conclusions

The Prolimatech Megahalems Rev. B was, at the time we tested it, one of the best CPU coolers available on the market. Nowadays, the Red Edition has a few competitors with slightly better performance, but the Megahalems name is still a synonym with high-end cooler.

In our tests, the Megahalems Red Edition performed very well, standing among the best air coolers we tested, even using only one fan. With two fans, it may perform even better.

Its construction is excellent and it looks great inside the case.

For all those qualities, the Prolimatech Megahalems receives the Hardware Secrets Silver Award.

Originally at http://www.hardwaresecrets.com/article/Prolimatech-Megahalems-Red-Series-CPU-Cooler-Review/1748


© 2004-14, Hardware Secrets, LLC. All Rights Reserved.

Total or partial reproduction of the contents of this site, as well as that of the texts available for downloading, be this in the electronic media, in print, or any other form of distribution, is expressly forbidden. Those who do not comply with these copyright laws will be indicted and punished according to the International Copyrights Law.

We do not take responsibility for material damage of any kind caused by the use of information contained in Hardware Secrets.