NZXT HAVIK 140 CPU Cooler Review
By Rafael Otto Coelho on June 16, 2011


Introduction

Hardware Secrets Silver Award

The HAVIK 140 is the first CPU cooler from NZXT. It has six heatpipes and two 140-mm fans. Let´s check it out! 

The HAVIK 140 comes in a tough cardboard box, as you see in Figure 1.

NZXT HAVIK 140
click to enlarge
Figure 1: Package

Figure 2 shows what the box contains: heatsink, fans, manual, thermal grease, and installation hardware.

NZXT HAVIK 140
click to enlarge
Figure 2: Accessories

Figure 3 displays the HAVIK 140 heatsink.

NZXT HAVIK 140
click to enlarge
Figure 3: The NZXT HAVIK 140

This cooler is discussed in detail in the following pages.

The NZXT HAVIK 140

Figure 4 reveals the front of the heatsink. The six heatpipes are installed in two rows, since both sides of each heatpipe come into the heatsink.

NZXT HAVIK 140
click to enlarge
Figure 4: Front view

From the side, the heatsink seems to be very small.

NZXT HAVIK 140
click to enlarge
Figure 5: Side view

Figure 6 shows the top of the cooler. The fin shape is simple.

NZXT HAVIK 140
click to enlarge
Figure 6: Top view

Figure 7 presents the structure of the heatpipes at the base.

NZXT HAVIK 140
click to enlarge
Figure 7: Heatpipes

The NZXT HAVIK 140 (Cont’d)

In Figure 8, you see the base of the cooler, made of nickel-plated copper. This base is well-polished, with an almost mirror-like aspect.

NZXT HAVIK 140
click to enlarge
Figure 8: Base

Figure 9 reveals the 140 mm fans. They have three-pin connectors, which means they are not PWM compatible.

NZXT HAVIK 140
click to enlarge
Figure 9: Fans

Figure 10 presents one fan with the rubber holders installed. Those holders make the fan easy to install and remove, while absorbing vibrations.

NZXT HAVIK 140
click to enlarge
Figure 10: Fan holders

Figure 10 presents the heatsink with the fans installed.

NZXT HAVIK 140
click to enlarge
Figure 11: Fans installed

Installation

Figure 11 shows the backplate used to install the HAVIK 140, with the screws installed in the position for socket LGA1156/1155 CPUs. On socket LGA775 or socket LGA1366 CPUs, you just need to use another holes. For AMD processors, you need to use the other side of the backplate.

NZXT HAVIK 140
click to enlarge
Figure 12: Backplate

After inserting the backplate (with screws) on the solder side of the motheboard, you need to install two metal holders on the component side. Figure 13 illustrates those pieces installed on our motherboard.

NZXT HAVIK 140
click to enlarge
Figure 13: Holding system installed

Figure 14 reveals the HAVIK 140 heatsink installed in our computer. Now you can install the fans.

NZXT HAVIK 140
click to enlarge
Figure 14: Heatsink installed

In Figure 15, you can see the cooler ready to use.

NZXT HAVIK 140
click to enlarge
Figure 15: Installed in our system

How We Tested

We tested the cooler with a Core i7-860 CPU (quad-core, 2.8 GHz), which is a socket LGA1156 processor with a 95 W TDP (Thermal Design Power). In order to get higher thermal dissipation, we overclocked it to 3.3 GHz (150 MHz base clock and 22x multiplier), keeping the standard core voltage (Vcore), which was the maximum stable overclock we could make with the stock cooler. Keep in mind that we could have raised the CPU clock more, but to include the stock cooler in our comparison, we needed to use this moderate overclock.

We measured noise and temperature with the CPU idle and under full load. In order to get 100% CPU usage in all threads, we ran Prime 95 25.11 with the "In-place Large FFTs" option. (In this version, the software uses all available threads.)

We compared the tested cooler to the Intel stock cooler with a copper base (included with the CPU), as well as with other coolers. Note that in the past, we tested coolers with a socket LGA775 CPU, and we retested some "old" coolers with this new methodology. This means you can find different values in older reviews than the values you will read in the next page. Every cooler was tested with the thermal compound that accompanies it.

Room temperature measurements were taken with a digital thermometer. The core temperature was read with the SpeedFan program (available from the CPU thermal sensors), using an arithmetic average of the core temperature readings. During the tests, the left panel of the case was open.

The sound pressure level (SPL) was measured with a digital noise meter, with its sensor placed 4" (10 cm) from the fan. We turned off the case and video board cooler fans so they wouldn't interfere with the results. This measurement is only for comparison purposes, because a precise SPL measurement needs to be made inside an acoustically insulated room with no other noise sources, which isn't the case here.

Hardware Configuration

Operating System Configuration

Software Used

Error Margin

We adopted a 2 °C error margin, meaning temperature differences below 2 °C are considered irrelevant.

Our Tests

The table below presents the results of our measurements. We repeated the same test on all coolers listed below. Each measurement was taken with the CPU at idle and at full load. In the models with a fan supporting PWM, the motherboard controlled the fan speed according to core load and temperature. On coolers with an integrated fan controller, the fan was set at the minimum speed on the idle test and at full speed on the full load test.

 

Idle Processor

Processor at Full Load

CoolerRoom Temp.NoiseSpeedCore Temp.NoiseSpeedCore Temp.
Intel stock (socket LGA1156)14 °C44 dBA1700 rpm46 °C54 dBA2500 rpm90 °C
Cooler Master Hyper TX3 G114 °C47 dBA2050 rpm33 °C56 dBA2900 rpm62 °C
Zalman CNPS10X Extreme14 °C45 dBA1400 rpm27 °C53 dBA1950 rpm51 °C
Thermaltake Silent 115614 °C44 dBA1200 rpm38 °C49 dBA1750 rpm69 °C
Noctua NH-D1414 °C49 dBA1250 rpm27 °C49 dBA 1250 rpm53 °C
Zalman CNPS10X Performa14 °C46 dBA1500 rpm28 °C52 dBA1950 rpm54 °C
Prolimatech Megahalems14 °C40 dBA750 rpm27 °C60 dBA2550 rpm50 °C
Thermaltake Frio14 °C46 dBA1450 rpm27 °C60 dBA2500 rpm50 °C
Prolimatech Samuel 1714 °C40 dBA750 rpm40 °C60 dBA2550 rpm63 °C
Zalman CNPS8000A18 °C43 dBA1400 rpm39 °C54 dBA2500 rpm70 °C
Spire TherMax Eclipse II14 °C55 dBA2200 rpm28 °C55 dBA2200 rpm53 °C
Scythe Ninja317 °C39 dBA700 rpm32 °C55 dBA1800 rpm57 °C
Corsair A5018 °C52 dBA1900 rpm33 °C52 dBA1900 rpm60 °C
Thermaltake Jing18 °C44 dBA850 rpm34 °C49 dBA1300 rpm60 °C
GlacialTech Alaska18 °C43 dBA1150 rpm36 °C51 dBA1600 rpm60 °C
Deepcool Gamer Storm18 °C43 dBA1100 rpm35 °C48 dBA1600 rpm62 °C
Corsair A7026 °C56 dBA1900 rpm40 °C56 dBA1900 rpm65 °C
Deepcool Ice Blade Pro23 °C45 dBA1200 rpm38 °C52 dBA1500 rpm64 °C
AC Freezer 7 Pro Rev. 223 °C47 dBA1750 rpm44 °C51 dBA2100 rpm77 °C
Corsair H7027 °C60 dBA1900 rpm37 °C60 dBA1900 rpm61 °C
Zalman CNPS9900 Max27 °C55 dBA1600 rpm38 °C58 dBA1750 rpm63 °C
Arctic Cooling Freezer 11 LP25 °C45 dBA1700 rpm51 °C49 dBA1950 rpm91 °C
CoolIT Vantage26 °C60 dBA2500 rpm37 °C60 dBA2500 rpm62 °C
Deepcool Ice Matrix 60025 °C46 dBA1100 rpm41 °C53 dBA1300 rpm69 °C
Titan Hati26 °C46 dBA1500 rpm40 °C57 dBA2450 rpm68 °C
Arctic Cooling Freezer 1327 °C49 dBA1950 rpm41 °C53 dBA2300 rpm70 °C
Noctua NH-C1426 °C52 dBA1300 rpm37 °C52 dBA1300 rpm61 °C
Intel XTS100H26 °C49 dBA1200 rpm42 °C64 dBA2600 rpm68 °C
Zalman CNPS5X SZ23 °C52 dBA2250 rpm38 °C57 dBA2950 rpm69 °C
Thermaltake SlimX321 °C50 dBA2700 rpm46 °C50 dBA2750 rpm99 °C
Cooler Master Hyper 10121 °C50 dBA2600 rpm38 °C57 dBA3300 rpm71 °C
Antec Kühler H2O 62019 °C52 dBA1400 rpm34 °C55 dBA1400 rpm58 °C
Arctic Cooling Freezer 13 Pro20 °C46 dBA1100 rpm36 °C49 dBA1300 rpm62 °C
GlacialTech Siberia22 °C49 dBA1400 rpm34 °C49 dBA1400 rpm61 °C
Evercool Transformer 318 °C46 dBA1800 rpm33 °C51 dBA2250 rpm65 °C
Zalman CNPS11X Extreme20 °C51 dBA1850 rpm34 °C56 dBA2050 rpm61 °C
Thermaltake Frio OCK15 °C44 dBA1000 rpm27 °C64 dBA2200 rpm51 °C
Prolimatech Genesis18 °C49 dBA1050 rpm30 °C49 dBA1050 rpm54 °C
Arctic Cooling Freezer XTREME Rev. 215 °C41 dBA1050 rpm32 °C44 dBA1400 rpm60 °C
NZXT HAVIK 14016 °C48 dBA1250 rpm29 °C49 dBA1250 rpm55 °C

In the graph below, at full load you can see how many degrees Celsius hotter the CPU core is than the air outside the case. The lower this difference, the better is the performance of the cooler.

NZXT HAVIK 140

Main Specifications

The main specifications for the NZXT HAVIK 140 CPU cooler include:

Conclusions

NZXT did a good job producing the HAVIK 140 CPU cooler. Of course, any cooler with its design cannot disappoint, with a big heatsink with six U-shaped heatpipes, and two 140 mm fans with good airflow.

The result is a great cooler, although not a revolutionary one. With good performance, reasonably low noise level, simple installation and good looks, the NZXT HAVIK 140 receives the Hardware Secrets Silver Award.

Originally at http://www.hardwaresecrets.com/article/NZXT-HAVIK-140-CPU-Cooler-Review/1312


2004-14, Hardware Secrets, LLC. All Rights Reserved.

Total or partial reproduction of the contents of this site, as well as that of the texts available for downloading, be this in the electronic media, in print, or any other form of distribution, is expressly forbidden. Those who do not comply with these copyright laws will be indicted and punished according to the International Copyrights Law.

We do not take responsibility for material damage of any kind caused by the use of information contained in Hardware Secrets.