| Sigma Unicorn Case Review | |
| By Gabriel Torres on June 9, 2008 | Page 5 of 7 |
![]() The Disk Drive Bays (Cont’d)To install hard disk drives in the cage you need to first install two metallic rails to each drive. These rails are located inside a small toolbox located below the hard disk drive cage.
The installation of optical drives, floppy disk drives and a hard disk on the 3 ½” internal bay located outside the hard disk drive cage is very easy. First remove the cover located in front of the bay you want to use (step not necessary for installing the hard disk drive), remove the screwless installation mechanism twisting its knob counter clockwise, slide the drive in the bay, place the plastic installation mechanism back in place and then turn its knob clockwise. That’s it. | |
| Originally at http://www.hardwaresecrets.com/article/566/5 | Pages (7): 1 2 3 4 5 6 7 » |
|
© 2004-9, Hardware Secrets, LLC. All Rights Reserved. Total or partial reproduction of the contents of this site, as well as that of the texts available for downloading, be this in the electronic media, in print, or any other form of distribution, is expressly forbidden. Those who do not comply with these copyright laws will be indicted and punished according to the International Copyrights Law. We do not take responsibility for material damage of any kind caused by the use of information contained in Hardware Secrets. | |