Transient Filtering Stage

As we mentioned on other articles and reviews, the first place we like to take a look when opening a power supply to have a hint about its quality is its filtering stage. The recommend components for this stage are two ferrite coils, two ceramic capacitors (Y capacitors, usually blue), one metalized polyester capacitor (X capacitor) and one MOV (Metal-Oxide Varistor). Very low-end power supplies use fewer components than that, usually removing the MOV and the first coil.

On this stage this power supply is flawless, providing two Y capacitors, one X capacitor and one MOV more than required.

click to enlarge
Figure 6: Transient filtering stage (part 1).

click to enlarge
Figure 7: Transient filtering stage (part 2).

Now let’s have a more detailed discussion on the components used on eXtreme Power Plus 460 W.

Total or partial reproduction of the contents of this site, as well as that of the texts available for downloading, be this in the electronic media, in print, or any other form of distribution, is expressly forbidden. Those who do not comply with these copyright laws will be indicted and punished according to the International Copyrights Law.

We do not take responsibility for material damage of any kind caused by the use of information contained in Hardware Secrets.