A Look Inside Strider ST50F

We decided to disassemble this power supply to see how it looks like inside, what is the design used and what components are used. Please read our Anatomy of Switching Power Supplies tutorial to understand how a power supply works inside and to compare this power supply to others.

In this page we will have an overall look, while on the next pages we will discuss in details the quality and rating of the components used.

This power supply uses the same project as Zalman ZM360B-APS and ZM460B-APS power supplies, as you can see comparing Figure 4 to Figure 5.

click to enlarge
Figure 4: SilverStone Strider ST50F overall look.

click to enlarge
Figure 5: Zalman ZM360B-APS overall look.

One interesting thing about this power supply is that it uses its housing as an extension to the secondary heatsink, as you can see on Figure 6. The manufacturer used thermal grease between the secondary heatsink and the power supply housing.

click to enlarge
Figure 6: The power supply housing is also used as a heatsink.

click to enlarge
Figure 7: Overall look.

click to enlarge
Figure 8: Overall look.

Total or partial reproduction of the contents of this site, as well as that of the texts available for downloading, be this in the electronic media, in print, or any other form of distribution, is expressly forbidden. Those who do not comply with these copyright laws will be indicted and punished according to the International Copyrights Law.

We do not take responsibility for material damage of any kind caused by the use of information contained in Hardware Secrets.