Introduction
Launched under SilverStone Kublai series, KL03 is the latest case from this manufacturer, targeted to users that want a big case with high-end thermal performance but don’t want to buy a very expensive all-aluminum product, like the cases from Temjin series also from SilverStone. In fact KL03 is a hybrid product: its body is made of zinc-coated steel, but its frontal panel is made of aluminum.
We have to categorize KL03 as a four-bay case just to keep using the same standard we used for all our reviews, even though you can install up to seven 5 ¼” devices if you remove the hard disk drive cage and use that space to install three more 5 ¼” devices (more about this later).
KL03 is available in black or silver and with or without a transparent side window. We reviewed the silver model with solid side panel. Its upper part glows blue when the computer is turned on.
This case is so big that we couldn’t find a position on our bench to take good pictures of it, so we had to take pictures of it on the floor. Sorry about that!
click to enlarge
Figure 1: SilverStone KL03 case.
As we mentioned this is a hybrid case, with steel body, aluminum frontal panel and aluminum frontal cover/door.
click to enlarge
Figure 2: Its frontal door is made of aluminum.
On Figure 3 you can see the frontal panel with the frontal door opened. This case has four 5 ¼” bays, two external 3 ½” bays for floppy disk drives, one internal 3 ½” bay for hard disk drives (not shown on Figure 3) and four 3 ½” bays for hard disk drives behind the frontal 120-mm fan that comes with the product. Of course we will talk about them in more details shortly.
click to enlarge
Figure 3: KL03 with its frontal door opened.
One interesting feature of this case is that you can remove the frontal door by pressing its upper hinge, as shown on Figures 4 and 5. Not only that, you can remove the hinges and install them on the other side of the door, so if you don’t want the default configuration of the door – opening right to left – you can change it to open from left to right. This is a really good option to have.
click to enlarge
Figure 4: Press the upper hinge to release the door.
click to enlarge
Figure 5: Door removed from the case.
The Frontal Panel
The frontal panel is entirely made of aluminum and you can see it on Figure 6 with the frontal door removed.
click to enlarge
Figure 6: Frontal panel.
To remove the covers to install drives you first need to open the two lateral latches (which are black on the silver model), as shown on Figure 7. With these latches opened you can remove the covers to add/remove drives.
click to enlarge
Figure 7: Opening the lateral latches.
click to enlarge
Figure 8: Frontal panel with latches opened.
If you pay attention to the pictures above you can clearly see the four external 5 ¼” bays, the two external 3 ½” bays for floppy disk drives and a 120-mm fan. Removing this fan you will find four 3 ½” bays for hard disk drives.
This fan is different from all other frontal fans we’ve seen to date. Instead of using regular wires for its electrical connection to the power supply it uses three metallic contacts (see Figure 9), making it extremely easy to remove this fan from the case, step that is necessary for installing hard disk drives.
click to enlarge
Figure 9: Frontal 120-mm fan removed from the case. It doesn’t use wires on its connection to the power supply.
Hard Disk Drive Bays
On Figure 10 you can see the hard disk drive bays. Each one contains a plastic drawer that not only makes hard disk drive installation very easy, but also allows hot swapping, if your motherboard also supports this feature, of course (hot swapping allows you to replace your hard disk drive with the computer turned on). This case comes with only one hot swap connector, which is installed on the first bay (we will show this connector when we talk about the inside of this case), but you can buy additional connectors from SilverStone and install them on the other three bays in order to have a RAID solution with hot swapping.
click to enlarge
Figure 10: Hard disk drive bays.
These bays are available inside a cage, which can be removed, allowing you to install three 5 ¼” external devices there. The case still has one more internal 3 ½” bay for hard disk drives.
Removing each drawer is very simple, just press the right latch, pull the front part of the drawer to an angle of 45º to release the drawer and them just pull the drawer towards you.
click to enlarge
Figure 11: Removing the hard disk drive drawer.
click to enlarge
Figure 12: Removing the hard disk drive drawer.
click to enlarge
Figure 13: Removing the hard disk drive drawer.
click to enlarge
Figure 14: Hard disk drive drawer.
Outside KL03
On Figure 15 you can see the switches and connectors available on KL03: two USB ports, one Firewire port, heaphones output, microphone input, power switch and reset switch. The location of these connectors and switches is perfect: on top of the unit. As you can see, this part of the case is also in aluminum. Here we missed an eSATA port. We think that a case from this level should have at least one eSATA port on this panel.
click to enlarge
Figure 15: Frontal connectors.
On Figure 16 you can see the rear of KL03. As you can see this is a traditional seven-slot case, coming with a 120-mm fan on its rear. As happens with the majority of high-end cases, this case doesn’t come with a power supply. What is interesting about this case is that you can remove the frame that holds the power supply in place, allowing you to install a redundant power supply, which is bigger and doesn’t fit regular ATX cases.
click to enlarge
Figure 16: Rear side.
If you play close attention on Figure 16 you can see that this case use regular screws. We think a case from this level deserved thumbscrews.
Another feature of this case is its feet. You can leave them on their default position (Figure 17), you can rotate them 90º so they become apparent (Figure 18) or you can simply remove them with a Philips screwdriver, if you don’t like them.
click to enlarge
Figure 17: Default position of the feet.
click to enlarge
Figure 18: Rotating the feet 90º they become apparent.
Inside KL03
The side panels of this case open as traditional ATX cases, i.e. by pulling them to the rear side of the case. On Figure 19 you have an overall look of its interior.
click to enlarge
Figure 19: Inside KL03.
The first thing that catches the eye is the panel for install two 120-mm side fans on the lower section of the case to cool down peripheral cards, especially video cards. These fans, however, don’t come with the case.
This panel has two hinges, opening like a door after you have removed the screw that fastens it to the rear end of the case.
click to enlarge
Figure 20: Side panel for installing two optional 120-mm fans.
Between the two fans there is a plastic piece containing six plastic fingers. These fingers are used to hold peripheral cards in place, as during transportation big cards can become lose and even lift out of the slot, even if they are properly screwed to the case. The case comes with a spoon-shaped tool for adjusting the height of these fingers (see it on Figure 19), and what you need to do is, after your PC is assembled, to push each one of these fingers down until they firmly reach the peripheral card right below them.
click to enlarge
Figure 21: Fingers for holding big peripheral cards in place.
Talking about fans, on Figure 22 you can see the rear part of the case from inside, showing the seven slots and the rear 120-mm fan that comes with the case.
click to enlarge
Figure 22: Rear fan.
On Figure 23 you have a close-up from the rear side of the hard disk drive bays. As you can see, hot swap power and data connectors are available on the upper bay and if you want to enable hot swapping on the other bays you will need to buy extra connectors from SilverStone. As we mentioned before, the four external hard disk drive bays are inside a cage that can be removed if you want to install up to three more optical drives on the case (as if four bays weren’t enough already). Right above the hard disk drive cage you can see the internal hard disk drive bay. So you can install up to five hard disk drives in this computer case.
click to enlarge
Figure 23: Hot swap connectors.
Right above the internal 3 ½” hard disk drive bay are the two external 3 ½” bays for floppy disk drives. This case doesn’t allow you to remove the floppy disk drive cage, what would allow you to install at least one more 5 ¼” drive. Since nowadays floppies are completely obsolete we don’t see why SilverStone kept two fixed bays for floppy disk drives.
Disk Drive Installation
Optical drives, floppy disk drives and the internal hard disk drive are installed to the case thru a screwless sliding mechanism. The case comes with three different kinds of rails for that: the metallic ones are for optical drives, the black ones are for hard disk drives and the blue ones are for floppy disk drives.
click to enlarge
Figure 24: Rails for installing disk drives to the case.
Even though several other manufacturers are also using sliding mechanisms for disk drive installation, the one used on KL03 doesn’t require screws: the rails are installed on the drives by pressure.
Below we will show how an optical drive is installed in this case. First pay attention on the metallic rails, as they have “R” and “L” (right and left) marked on them, and you should use an “R” rail on the unit right side and an “L” rail the unit left side (enlarge Figure 24 to see this).
click to enlarge
Figure 25: Installing rails to an optical drive.
click to enlarge
Figure 26: Installing an optical drive on the case.
If you want to install a hard disk drive on the internal 3 ½” bay or a floppy disk drive you should follow the same procedure, but using the appropriate rails.
click to enlarge
Figure 27: Hard disk drive with the proper rails installing.
click to enlarge
Figure 28: Installing a hard disk drive in the internal 3 ½” bay.
Main Features
Kublai KL03 case main specs include:
- Application: Extended ATX and smaller form factors derived from this one.
- Material: Zinc-coated steel (SECC) body (0.8 mm thick) and aluminum front panel (2.5 mm thick).
- Power supply: Doesn’t come with the product.
- Available colors: Black and silver.
- Size: 20 5/8” x 8 21/32” x 23 25/64” (52.4 cm x 22 cm x 59.4 cm) (H x W x D).
- Weight: 30 Lbs (14 Kg)
- Bays: Four external 5 ¼” bays (seven if the hard disk drive cage is removed), two external 3 ½” bays, one internal 3 ½” bay and four 3 ½” external accessible hard disk drive bays, one of them with SATA hot swap connectors.
- Expansion slots: Seven.
- Fans: One 120-mm fan on the rear, one 120-mm fan on the front and two optional 120-mm side fans.
- Extra features: Fingers for holding peripheral cards in place.
- More Information: http://www.silverstonetek.com
- Average price in the US*: USD 165.00.
* Researched at Froogle.com on the day we published this review.
Conclusions
This is a case that will definitely please the user that is looking for a case big enough to accommodate long video cards and big power supplies – including redundant units, if you’d like to have one. Not only that: bigger cases provide better thermal dissipation compared to smaller cases, where there is no available space for the correct airflow, especially if you have a lot of stuff inside your PC.
This case is really targeted to users with long peripheral cards (video cards in particular), as it comes with six adjustable fingers to hold peripheral cards in place. When you have long (and heavy) cards it is somewhat common for them to lift a little bit out of their slots during transportation, even if they are correctly screwed to the case.
Besides the traditional frontal and rear 120-mm fans that all high-end cases have you can install two side 120-mm fans to cool down the video cards.
Another highlight of this case are its SATA hot swap connectors available in one of the hard disk drive bays. All bays could have come with these connectors but we think SilverStone was smart here. First, putting connectors in all bays would have increased the price of this case. Second, with the case coming with only one set of hot swap connectors you can test whether hot swapping will work or not on your system, for then ordering the extra connectors if you are building a RAID array. Not knowing for sure that your system is compatible with hot swap or if you aren’t going to build a RAID system you would have spent extra money for nothing.
Installing drives on this case is a piece of cake with its screwless rails system.
The number of hard disk drive bays – five – is enough for almost everybody, including people building big RAID arrays, but the ultra mega enthusiast will probably be more comfortable with a case with at least six hard disk drive bays.
Even though it isn’t the cheapest case around – costing around USD 165 in the US and not coming with a power supply – its hybrid steel/aluminum design provides a far better cost/benefit ratio than all-aluminum cases, which cost over USD 300.
Even though we liked this case, we could spot some flaws: the absence of thumbscrews for opening the case, especially for a case on this price range; the floppy disk drive cage isn’t removable and since just a few people are still using floppies these days if the cage was removable we could either install more hard disk drives or more optical drives; and we think SilverStone should have added an eSATA port on the top with this case along the traditional connectors (USB, Firewire, etc).
If you are worried about your computer inner temperature, this case is one of the good options you have around if you can afford it.
Originally at http://www.hardwaresecrets.com/article/521
© 2004-9, Hardware Secrets, LLC. All Rights Reserved.
Total or partial reproduction of the contents of this site, as well as that of the texts available for downloading, be this in the electronic media, in print, or any other form of distribution, is expressly forbidden. Those who do not comply with these copyright laws will be indicted and punished according to the International Copyrights Law.
We do not take responsibility for material damage of any kind caused by the use of information contained in Hardware Secrets.