CoolIT Water-Cooling Products
By Gabriel Torres on January 14, 2008 Page 4 of 5

Boreas Case

Boreas is a custom-built Silverstone TJ07 case containing CoolIT’s Boreas water cooler, one CPU block, two video card cold plates (identical to the ones used on Reference Series, see previous page) and a MTEC Control Center (see Figure 6). This is the most extreme cooling solution from CoolIT, providing the extra performance required by extreme overclockers.

This system comes also pre-assembled, requiring no assembly from the user besides the installation of the video cards cold plates.

On Figure 14 you can see the custom-made Silverstone TJ07.

CoolIT Boreas Cooler
click to enlarge
Figure 14: Custom-made Silverstone TJ07.

On Figure 15 you can see the Boreas cooler installed inside the case and on Figures 16 and 17 how it looks like outside the case. This cooler has 12 thermoelectric coolers (TEC’s  or “Peltier”), three under each water block. The two fans pull hot air from inside the radiator to the outside, so air flows from inside the cooler to the outside.

CoolIT Boreas Cooler
click to enlarge
Figure 15: Boreas cooler.

CoolIT Boreas Cooler
click to enlarge
Figure 16: Boreas cooler.

CoolIT Boreas Cooler
click to enlarge
Figure 17: Boreas cooler.


Originally at http://www.hardwaresecrets.com/article/515/4Pages (5): 1 2 3 4 5 »

© 2004-9, Hardware Secrets, LLC. All Rights Reserved.

Total or partial reproduction of the contents of this site, as well as that of the texts available for downloading, be this in the electronic media, in print, or any other form of distribution, is expressly forbidden. Those who do not comply with these copyright laws will be indicted and punished according to the International Copyrights Law.

We do not take responsibility for material damage of any kind caused by the use of information contained in Hardware Secrets.