Introduction

During CES 2008 Zalman displayed their next high-end case, Z-Machine LQ1000, which is basically their Z-Machine GT1000 with a Reserator XT water-cooling system added. Let’s take a look on this forthcoming product from Zalman.

click to enlarge
Figure 1: Zalman Z-Machine LQ1000.

LQ1000 has four external 5 ¼” bays, one external 3 ½” bay and four internal HDD bays, with the same installation mechanism used by GT1000. Zalman provides thumbscrews for fastening the external drives.

On its frontal panel you can find two USB 2.0 ports, one Firewire port, microphone input and headphones output, standby and reset switches and components from the water-cooling device: water flow meter, fan speed meter, water flow speed control, water flow indicator, etc. The only thing we think that could have improved this case was the addition of at least one eSATA port.

click to enlarge
Figure 2: Front panel.

click to enlarge
Figure 3: Front panel.

On the rear side of the case you will find the water cooler radiator. This case, like 99.9% of the cases on the market, provides seven slots for expansion boards.

click to enlarge
Figure 4: Rear panel.

Total or partial reproduction of the contents of this site, as well as that of the texts available for downloading, be this in the electronic media, in print, or any other form of distribution, is expressly forbidden. Those who do not comply with these copyright laws will be indicted and punished according to the International Copyrights Law.

We do not take responsibility for material damage of any kind caused by the use of information contained in Hardware Secrets.