A Look Inside HX1000W

We decided to disassemble this power supply to see how it looks like inside, what is the design used and what components are used. Please read our Anatomy of Switching Power Supplies tutorial to understand how a power supply works inside and to compare this power supply to others.

In this page we will have an overall look, while on the next pages we will discuss in details the quality and rating of the components used.

What immediately got our eye was the fact that this power supply has two completely independent 500 W power supplies inside. Usually power supplies with two transformers the switching section is shared (i.e. there is only switching section that drives both transformers) or the secondary outputs are connected together. This isn’t the case with this unit. As you can see, there are even two separated active PFC circuits, one for each power supply. The only thing that is shared among them is the transient filtering stage and the rectification bridge.

The +5VSB (standby) power supply is built on a separated printed circuit board (see Figures 5 and 6).

click to enlarge
Figure 4: Overall look.

click to enlarge
Figure 5: The +5VSB power supply.

click to enlarge
Figure 6: The +5VSB power supply.

click to enlarge
Figure 7: Overall look.

click to enlarge
Figure 8: Overall look.

Total or partial reproduction of the contents of this site, as well as that of the texts available for downloading, be this in the electronic media, in print, or any other form of distribution, is expressly forbidden. Those who do not comply with these copyright laws will be indicted and punished according to the International Copyrights Law.

We do not take responsibility for material damage of any kind caused by the use of information contained in Hardware Secrets.