3D Performance: Quake 4

Quake 4 is very heavy game that uses the same engine of Doom 3. We used the id_demo001 available on version 1.2 of Quake 4 to make our benchmarking with this game. We run this demo four times at 1024x768x32 resolution and image quality settings on “low”. The results shown on the chart is an arithmetic average of the collected data. The results are in frames per second. For more information on how to use Quake 4 to benchmark a PC, read our tutorial on this subject.

On Quake 4 the on-board video provided by AMD 690G was faster than the one provided by Radeon Xpress 1100 (10.20%) and than the one provided by GeForce 6100-405 (29.69%). But this really means nothing, as you won’t be able to play Quake 4 (or Doom 3) with the on-board video provided by this motherboard: even with image quality set to low we could only reach 8.5 frames per second.

AMD 690G was one more time beaten by the two low-end PCI Express video cards we installed: GeForce 6200 TC (64 MB, 64-bit) was 109.61% faster and GeForce 6200 (128 MB, 128-bit) was 319.22% faster than the on-board video of the reviewed motherboard.

When we installed a GeForce 7800 GTX on the reviewed card it didn’t achieve the same performance level of an ASUS M2N32-SLI De Luxe with the same video card installed: the motherboard from ASUS was 6.52% faster.

Total or partial reproduction of the contents of this site, as well as that of the texts available for downloading, be this in the electronic media, in print, or any other form of distribution, is expressly forbidden. Those who do not comply with these copyright laws will be indicted and punished according to the International Copyrights Law.

We do not take responsibility for material damage of any kind caused by the use of information contained in Hardware Secrets.