| ECS KN3 SLI2 Extreme Motherboard Review | |
| By Gabriel Torres on February 14, 2007 | Page 9 of 10 |
Overclocking
You can also find detailed memory adjustments, where serious tweakers will have lots of fun.
Even though this motherboard at a first glance has several overclocking options, there is one big problem. There is only one clock generator. This means that when you increase the main clock generator, you will not only increase the CPU clock but also the PCI Express, the PCI and the SATA clocks. This is a major drawback for serious overclockers. That is probably the reason we achieved a very low overclocking with this motherboard: we could set the base clock only up to 210 MHz, making our Athlon 64 X2 5000+ (which runs by default at 2.6 GHz) to run internally at 2.73 GHz, a just 5% increase on the CPU internal clock rate. Above that the system was unstable. With all other high-end socket AM2 motherboards we reviewed to date we could make the system to run at least with a 220 MHz base clock. | |
| Originally at http://www.hardwaresecrets.com/article/422/9 | Pages (10): 1 2 3 4 5 6 7 8 » ... Last » |
© 2004-8, Hardware Secrets, LLC. All Rights Reserved. Total or partial reproduction of the contents of this site, as well as that of the texts available for downloading, be this in the electronic media, in print, or any other form of distribution, is expressly forbidden. Those who do not comply with these copyright laws will be indicted and punished according to the International Copyrights Law. We do not take responsibility for material damage of any kind caused by the use of information contained in Hardware Secrets. | |