| Zalman ZM600-HP 600 W Power Supply Review | |
| By Gabriel Torres on September 19, 2008 | Page 3 of 11 |
A Look Inside ZM600-HP
In this page we will have an overall look, while on the next page we will discuss in details the quality and rating of the components used. We can point out several differences between this power supply and a low-end (a.k.a. “generic”) one: the construction quality of the printed circuit board (PCB); the use of more components on the transient filtering stage; the active PFC circuitry; the power rating of all components; the design; etcetera. On Figures 8 and 9 you can compare Zalman ZM600-HP to OCZ GameXstream 700 W. You can see only four differences between the two: the color of the PCB, the use of a different heatsink design, the use of a voltage regulator integrated circuit on OCZ GameXstream 700 W for creating a minimum load on the +5 V rail and the modular cabling system (available only on Zalman ZM600-HP). On the next pages we will be checking whether the components used on both power supplies are the same or not.
The design of the heatsink used on the secondary is really interesting, using a copper heat-pipe. On Figure 10 you can see it better.
| |
| Originally at http://www.hardwaresecrets.com/article/402/3 | Pages (11): 1 2 3 4 5 6 7 8 » ... Last » |
© 2004-8, Hardware Secrets, LLC. All Rights Reserved. Total or partial reproduction of the contents of this site, as well as that of the texts available for downloading, be this in the electronic media, in print, or any other form of distribution, is expressly forbidden. Those who do not comply with these copyright laws will be indicted and punished according to the International Copyrights Law. We do not take responsibility for material damage of any kind caused by the use of information contained in Hardware Secrets. | |