3D Performance: Quake III

You may be asking why we are using Quake III, an old game, to evaluate motherboard performance. When we have a high-end video card installed, like was our case, newer 3D benchmarking software measures only the video card performance, and other components – the motherboard, in particular – don’t affect much the measurement taken by these programs. Since we were willing to measure the performance impact the motherboard would have on the system, such programs wouldn’t fit our needs.

Quake III, on the other hand, is very sensitive to any changes on the hardware configuration. So we decided to use this program instead of newer ones.

We used the demo four available on version 1.32 of Quake III to make our benchmarking with this game. We ran this demo three times at 1024x768x32 resolution and all image quality settings on their default configuration and we picked the middle value for our comparisons, i.e. we discarded the highest and the lowest values.

Check the results below.

Here Gigabyte achieved a performance similar to the other two motherboards included in our comparison.

Total or partial reproduction of the contents of this site, as well as that of the texts available for downloading, be this in the electronic media, in print, or any other form of distribution, is expressly forbidden. Those who do not comply with these copyright laws will be indicted and punished according to the International Copyrights Law.

We do not take responsibility for material damage of any kind caused by the use of information contained in Hardware Secrets.