Introduction

ECS RS482-M is a very simple socket 939 motherboard based on ATI’s chipset with embedded graphics, Radeon Xpress 200 – which uses the same graphics engine from Radeon X300 –, supporting Athlon 64, Athlon 64 FX and Athlon 64 X2 CPUs. We were very curious to benchmark Radeon Xpress 200 and compare its performance to cheap add-in video cards, like GeForce 6200, and also to its main competitor, nVidia’s GeForce 6100.

click to enlarge
Figure 1: ECS RS482-M Rev 1.0A motherboard.

There is nothing special about RS482-M visual aspect. RS482 and SB400 chips that together form Radeon Xpress 200 chipset use passive (fanless) heatsinks.

click to enlarge
Figure 2: RS482 north bridge and SB400 south bridge passive heatsinks.

Since it uses micro-ATX form factor, its layout is very compact. It uses Taiwanese capacitors from OST, which are also used by ASUS, and some from G-Luxon, which don’t have a good reputation because of the infamous electrolytic capacitor leakage problem.

This motherboard has on-board video, audio and LAN using SB400 south bridge, bringing also four 150 MB/s Serial ATA ports (with RAID 0 and 1 support), but with no NCQ (Native Command Queuing) support.

It would be more interesting if this motherboard had only two Serial ATA ports but supporting SATA-300 and NCQ.

click to enlarge
Figure 3: Four Serial ATA-150 ports.

It has two DDR-DIMM sockets, accepting up to 2 GB of DDR266/333/400 memory. Please pay very close attention here. ECS should have used different colors on the memory sockets to let you know that this motherboard supports DDR dual channel feature. You need to install two identical memory modules in order to achieve the maximum performance this motherboard can provide.

Of course people that buy a socket 939 motherboard knows that the CPU memory controller is capable of running under dual channel mode, but using the same color on both sockets may lead users to think that this motherboard uses single channel mode. Several users may install only one memory module on this motherboard because of this, reducing the PC performance.

So with this motherboard you need to always use two identical memory modules in order to use dual channel feature, which increases the system performance.

click to enlarge
Figure 4: Detail of memory sockets.

Its on-board audio is controlled by SB400 south bridge together with 6-channel Realtek ALC655 codec; its on-board 10/100 LAN is controlled by Realtek RTL8100C chip; this motherboard has also eight USB 2.0 ports, four soldered on the motherboard and four available thru I/O brackets, which don’t come with the motherboard.

The reviewed model came with two Firewire (IEEE 1394a) ports controlled by Texas Instruments TSB43AB22A chip, one soldered on the motherboard and another available thru an I/O bracket, which doesn’t come with the motherboard. This feature is optional.

click to enlarge
Figure 5: ECS RS482-M real panel.

Since it is a very simple motherboard, it doesn’t come with a lot of accessories: just one Serial ATA cable, one Serial ATA power adaptor and one IDE 80-wire cable.

On the CD-ROM that comes with this motherboard you will find only the motherboard drivers and utilities.

Total or partial reproduction of the contents of this site, as well as that of the texts available for downloading, be this in the electronic media, in print, or any other form of distribution, is expressly forbidden. Those who do not comply with these copyright laws will be indicted and punished according to the International Copyrights Law.

We do not take responsibility for material damage of any kind caused by the use of information contained in Hardware Secrets.