Introduction

Sometimes, especially when upgrading your PC, you may need to perform a BIOS upgrade in order to update your system to accept a new hardware part or to fix a bug. For the average Joe, this procedure is quite obscure. In this tutorial we will give step-by-step procedures on how to upgrade your system BIOS.

What is BIOS anyway? BIOS is a program stored inside the ROM memory of your motherboard. There are three programs stored there: BIOS, setup and POST. As they are physically stored in the same memory chip, the majority of users call setup and POST as “BIOS”, even though this is wrong, as they are three distinct programs. BIOS (Basic Input/Output System) teaches the system processor on how to deal with basic things, like how to access the hard disk drive and how to write text on screen. POST (Power On Self Test) is executed whenever you turn your PC on in order to test your system. It is in charge of that memory counting that happens every time your turn your PC on. And setup is that program that you call by pressing Del during POST (i.e. during memory counting) that is used to configure your motherboard.

So “BIOS upgrade” really means an upgrade on the programs stored on the motherboard ROM memory. Even though the procedure name is “BIOS upgrade”, you actually upgrade all three programs (BIOS, POST and setup).

The way to update the motherboard ROM depends on the type of memory chip used in your PC. There are two types of ROM chips used in PCs, Mask-ROM (only on very old motherboards and that cannot be updated by software) and Flash-ROM (on almost all motherboards, which is able to be updated by software). In this tutorial we will cover Flash-ROM.

If you have a very old motherboard (manufactured more than 10 years ago) that uses a Mask-ROM chip BIOS upgrade is only possible by replacing the chip with a new one containing the latest BIOS version. This chip can be bought on the motherboard manufacturer's web site or at http://www.unicore.com.

On Figures 1 and 2 you see the most common physical aspect of the motherboard ROM chip, where BIOS is stored. The packaging found on Figure 1 is called DIP (Dual In-Line Package) and is used on older motherboards, while the packaging found on Figure 2 is called PLCC (Plastic Leaded Chip Carrier) and is used by current motherboards.

click to enlarge
Figure 1: The BIOS chip. This kind of chip is called DIP (Dual In-Line Package).

click to enlarge
Figure 2: Another kind of BIOS chip, used by current motherboards. This kind of chip is called PLCC (Plastic Leaded Chip Carrier).

Total or partial reproduction of the contents of this site, as well as that of the texts available for downloading, be this in the electronic media, in print, or any other form of distribution, is expressly forbidden. Those who do not comply with these copyright laws will be indicted and punished according to the International Copyrights Law.

We do not take responsibility for material damage of any kind caused by the use of information contained in Hardware Secrets.