| Cooler Master NotePal Laptop Cooler | |
| By Gabriel Torres on March 20, 2006 | Page 2 of 4 |
Installation and Usage The installation is quite simple: just connect one end of the A/A USB cable that comes with the product at one available USB port on your laptop and the other end at one of the device’s USB port, as you can see on Figure 4.
Using it on a desk in quite comfortable, since it has an ergonomic design. It puts your laptop in an angle that helps typing without tiring your wrists. This design also helps heat dissipation, since it creates a tunnel below your laptop for the fans to blow hot air, as you can see on Figure 6.
You can also use it on your lap, even though you may feel a little bit strange of having a “small table” on your laps. But after the benefits of having a laptop that doesn’t heat your lap anymore will compensate for this initial sensation.
| |
| Originally at http://www.hardwaresecrets.com/article/300/2 | Pages (4): 1 2 3 4 » |
© 2004-8, Hardware Secrets, LLC. All Rights Reserved. Total or partial reproduction of the contents of this site, as well as that of the texts available for downloading, be this in the electronic media, in print, or any other form of distribution, is expressly forbidden. Those who do not comply with these copyright laws will be indicted and punished according to the International Copyrights Law. We do not take responsibility for material damage of any kind caused by the use of information contained in Hardware Secrets. | |