Super Talent Factory Tour in San Jose, CA, USA

Super Talent Factory Tour in San Jose, CA, USA
By Gabriel Torres on March 10, 2006	Page 4 of 7
Oven From the second SMT insertion machine the panel goes to an oven, where the solder paste is melted, thus making the components to stick to the PCB. click to enlarge Figure 7: Oven. click to enlarge Figure 8: Panel coming out of the oven. click to enlarge Figure 9: Panel at the end of the manufacturing line. click to enlarge Figure 10: Another panel coming out of the oven. Each line manufactures a single product type. Figures 8, 9 and 10 were taken at the end of different manufacturing lines.
Originally at http://www.hardwaresecrets.com/article/297/4	Pages (7): 1 2 3 4 5 6 7 »
© 2004-8, Hardware Secrets, LLC. All Rights Reserved. Total or partial reproduction of the contents of this site, as well as that of the texts available for downloading, be this in the electronic media, in print, or any other form of distribution, is expressly forbidden. Those who do not comply with these copyright laws will be indicted and punished according to the International Copyrights Law. We do not take responsibility for material damage of any kind caused by the use of information contained in Hardware Secrets.