Heatsink Installation

Memory modules from XMS series have heatsink, so they need to be attached, of course. The process of attaching the heatsink to the XMS memory modules is quite interesting.

click to enlarge
Figure 12: XMS memory modules without the heatsink installed.

The heatsinks are inserted into a metal frame (see Figure 13), and then thermal paste is applied on them (see Figure 14). Then, the memory module is placed on the heatsink, and the other side of the heatsink is placed on top of the memory module, forming a “sandwich”. A latch makes pressure in order to make both sides of the heatsink to stick on the memory module (see Figure 15). The metal frame is then inserted into an oven, where the thermal paste will melt, “gluing” the heatsink to the memory module. After that the modules are removed from the frame and sent to the labeling station.

click to enlarge
Figure 13: Heatsinks.

click to enlarge
Figure 14: Machine applying solder paste on the heatsinks.

click to enlarge
Figure 15: Installing the heatsink to the memory module.

Total or partial reproduction of the contents of this site, as well as that of the texts available for downloading, be this in the electronic media, in print, or any other form of distribution, is expressly forbidden. Those who do not comply with these copyright laws will be indicted and punished according to the International Copyrights Law.

We do not take responsibility for material damage of any kind caused by the use of information contained in Hardware Secrets.