Power Plugs

Nowadays power supplies provide the following connectors to feed the components from the PC:

• Main motherboard connector: this is one of the cables that you need to connect to the PC motherboard. It uses a big 24-pin plug, which is the biggest plug found on the power supply. Most power supplies will allow you to convert this 24-pin plug into a 20-pin plug (usually by removing the extra 4 pins), which is the standard used by older motherboards. Motherboards that use the 24-pin connector are called ATX12V 2.x, while motherboards that use the 20-pin connector can be either an ATX12V 1.x motherboard or an ATX motherboard. Note that these names refer to the electrical connection of the motherboard and not to the motherboard physical size. ATX is also a name used to describe the size of the motherboard, which can be confusing for some users (you can have an ATX motherboard with ATX12V 2.x connector, for example; in this case ATX means the size of the motherboard, 12” x 9.6” or 30.5 cm x 24.4 cm).

click to enlarge
Figure 6: Main motherboard connector (24-pin plug). See how it can be transformed into a 20-pin connector.

click to enlarge
Figure 7: Main motherboard connector (24-pin plug).

• ATX12V connector: This 4-pin connector is used to provide electrical current to the system CPU and must be installed on the motherboard. The connection of this connector is required – unless you use the EPS12V connector, see below.

click to enlarge
Figure 8: ATX12V connector.

click to enlarge
Figure 9: ATX12V connector.

• EPS12V connector: This 8-pin connector has the same goal of ATX12V, i.e. to provide electrical current to the system CPU. Since it has eight pins instead of four, it is capable of providing more current. Not all power supplies and not all motherboards come with this connector. On some power supplies the EPS12V connector is obtained by putting together two ATX12V connectors. If your motherboard and your power supply both have this connector, use it instead of using the ATX12V one. Motherboards that come with this connector often come with half of the connector covered with a sticker or a plastic cover, allowing you to use the power supply ATX12V connector on the motherboard EPS12V connector. You can install the ATX12V connector from the power supply on the EPS12V connector on the motherboard, however this isn’t recommended.

click to enlarge
Figure 10: EPS12V connector.

click to enlarge
Figure 11: On some power supplies the EPS12V connector is obtained by putting together two ATX12V connectors.

click to enlarge
Figure 12: EPS12V connector on a motherboard.

Total or partial reproduction of the contents of this site, as well as that of the texts available for downloading, be this in the electronic media, in print, or any other form of distribution, is expressly forbidden. Those who do not comply with these copyright laws will be indicted and punished according to the International Copyrights Law.

We do not take responsibility for material damage of any kind caused by the use of information contained in Hardware Secrets.