How to Unclog Epson Print Heads
By Gabriel Torres and Alexandre Souza on August 6, 2005 Page 3 of 4

Disassembling The Printer (Cont'd)

The paper type adjustment lever (PG lever) is connected to the right bushing, so you will need to remove it in order to remove the bushing.

PG lever mechanism
click to enlarge
Figure 5: PG lever mechanism.

How to remove the PG lever mechanism
click to enlarge
Figure 6: How to remove the PG lever mechanism.

If you remove the timing belt that moves the carriage assembly, remember to take notes of its EXACT position.

Now let’s see how to unclog an Epson print head to prevent you from buying another head.


Originally at http://www.hardwaresecrets.com/article/178/3Pages (4): 1 2 3 4 »
© 2004-8, Hardware Secrets, LLC. All Rights Reserved.

Total or partial reproduction of the contents of this site, as well as that of the texts available for downloading, be this in the electronic media, in print, or any other form of distribution, is expressly forbidden. Those who do not comply with these copyright laws will be indicted and punished according to the International Copyrights Law.

We do not take responsibility for material damage of any kind caused by the use of information contained in Hardware Secrets.