Cleaning the Read/Write Reads

The read/write heads are located on the VCR drum and they cannot be cleaned using a cotton swab or you will damage your VCR. On Figure 8 you see the drum and two of the read/write heads. If your VCR is a four-head VCR, you will find four of those heads there.

click to enlarge
Figure 8: Drum. The red arrows point two of the read/write heads.

To clean the read/write heads you will need a 1.5” x 4” (3.5 cm x 10 cm) piece of paper. Just get a blank sheet of paper and cut it.

click to enlarge
Figure 9: Pieces of regular blank paper are used to clean the heads.

Get one piece of paper and wet half of it with alcohol.

click to enlarge
Figure 10: Pour alcohol on one piece of paper.

To clean the heads you should put the wet piece of paper on the drum and rotate it counter-clock wise several times.

Now let’s talk about the incorrect way of doing that. You cannot do like we show on Figure 11 or you can damage the heads. The correct way we show on Figure 12.

click to enlarge
Figure 11: Incorrect way of cleaning the heads.

click to enlarge
Figure 12: Correct way.

Total or partial reproduction of the contents of this site, as well as that of the texts available for downloading, be this in the electronic media, in print, or any other form of distribution, is expressly forbidden. Those who do not comply with these copyright laws will be indicted and punished according to the International Copyrights Law.

We do not take responsibility for material damage of any kind caused by the use of information contained in Hardware Secrets.