| Kingmax Factory Tour in Hsin Chu, Taiwan | |
| By Gabriel Torres on June 3, 2005 | Page 1 of 9 |
![]()
Introduction We had the opportunity of visiting Kingmax’s factory in Hsin Chu, Taiwan. This is a great opportunity for you to learn how memories are manufactured, since Kingmax manufactures both memory chips and memory modules. There are many steps involved in the memory module manufacturing:
In summary, Kingmax gets the wafer from their wafer vendor (which they don’t disclose), cuts and packs it as memory chips and put the chips together in a memory module, buying the printed circuit boards from Brain Power, a company specialized in PCB manufacturing and very well known among memory enthusiasts. The memory chip manufacturing or “packing” as it is also called is done by a sister company called Kingpak. After being manufactured, the memory chips go still untested and unmarked (or UTT in the industry lingo) to Kingmax’s facilities (which are located in a different place) for testing and labeling. After that, memory modules are manufactured. Kingpak factory also manufactures optical sensors for cameras, and both Kingpak and Kingmax also manufacture memory cards. We’ll concentrate our tour on describing how memory modules are manufactured. | |
| Originally at http://www.hardwaresecrets.com/article/148/1 | Pages (9): 1 2 3 4 5 6 7 8 » ... Last » |
© 2004-8, Hardware Secrets, LLC. All Rights Reserved. Total or partial reproduction of the contents of this site, as well as that of the texts available for downloading, be this in the electronic media, in print, or any other form of distribution, is expressly forbidden. Those who do not comply with these copyright laws will be indicted and punished according to the International Copyrights Law. We do not take responsibility for material damage of any kind caused by the use of information contained in Hardware Secrets. | |