In Figure 4, we have a front view of the cooler, where we can see the 120 mm fan and the six heatpipes.
In Figure 5, you can see how big this cooler is. Each tower has its own fan.
In Figure 6, you can see the back of the cooler. Note that the heatpipes are equally distributed inside the heatsink.
In Figure 7, you have a top view of the cooler. The fins have "teeth" in order to increase the turbulence and give better contact between the airflow and the dissipating surface.
- 1. Introduction
- 2. The NH-D14
- 3. The NH-D14 (Cont’d)
- 4. Installation
- 5. How We Tested
- 6. Our Tests
- 7. Main Specifications
- 8. Conclusions