In Win D-Frame Case Review

Building the D-Frame

Putting the D-Frame together is relatively easy – and fun. Starting with the motherboard tray (Figure 5), you need to affix the top and bottom frames (Figure 6). Then, you need to install the front and rear frames (Figure 7). By the end of this process, you have an overall idea of how the case will look.

In Win D-FrameFigure 5: The motherboard tray

In Win D-FrameFigure 6: Top and bottom frames installed to the motherboard tray

In Win D-FrameFigure 7: Front and rear frames installed to the case

The next step is to install the screws that will hold the glass panels. See Figure 8.

In Win D-FrameFigure 8: Case with the screws for the side panels installed

Hot Deals

Author: Gabriel Torres

Gabriel Torres is a Brazilian best-selling ICT expert, with 24 books published. He started his online career in 1996, when he launched Clube do Hardware, which is one of the oldest and largest websites about technology in Brazil. He created Hardware Secrets in 1999 to expand his knowledge outside his home country.

Share This Post On
Subscribe To Our Newsletter

Subscribe To Our Newsletter

Join our mailing list to receive the latest news and updates from our website.

You have been added to our newsletter!