The Fractal Design Adjust 108
The fan controller uses one 5.25” bay. It is simply a fan controller, with no thermometers or USB ports. The fans are controlled using six sliding potentiometers, which can be seen in Figure 3. Below each potentiometer, you can see one LED.
Figure 4 exhibits the side of the controller, where you see the holes for the screws.
Figure 5 presents the rear side of the controller, revealing the circuit board. All cables are connected to the device with removable connectors.
- 1. Introduction
- 2. The Fractal Design Adjust 108
- 3. Installation
- 4. Operation
- 5. Main Specifications
- 6. Conclusions