The Evercool Transformer 3
In Figure 4, you have a front view of the heatsink. Note that the heatpipes are not in a straight row, allowing all of them (not only the first one) to receive direct airflow.
Figure 5 shows the side of the heatsink. Here you can see the three heatpipes. Notice that part of the heatsink side is closed.
In Figure 6 there is the top of the cooler, where the heatpipes’ disposition is clear.
Figure 7 exhibits the base of the cooler, which is finely polished, achieving a mirror-like appearance.
The fan is shown in Figure 8. It is made of plastic, but has a shiny metal look. The connector has four pins, which means this fan is PWM-compatible.
- 1. Introduction
- 2. The Evercool Transformer 3
- 3. Installation
- 4. How We Tested
- 5. Our Tests
- 6. Main Specifications
- 7. Conclusions