The Enermax ETD-T60-VD
Figure 4 illustrates the front of the cooler. Here you can see two heatpipes entering the heatsink, and the tips of four other heatpipes.
Figure 5 reveals the side of the cooler. Notice that the heatsink is shifted from the base; it is intended to stay over the voltage regulator circuit of the motherboard, helping to cool it.
The rear of the cooler is shown in Figure 6. Here, four heatpipes enter the heatsink; you can see the tips of the other two.
In Figure 7, you can see the cooler from the top, where the T.B.VEGAS Duo 120 mm fan is located.
- 1. Introduction
- 2. The Enermax ETD-T60-VD
- 3. The Enermax ETD-T60-VD (Cont’d)
- 4. Installation
- 5. How We Tested
- 6. Our Tests
- 7. Main Specifications
- 8. Conclusions