The Deepcool Fiend Shark
Figure 4 illustrates the front of the cooler. The heatsink is 2.1 inches (55 mm) high from the CPU. The six 6 mm heatpipes connect the base to the heatsink.
Figure 5 reveals the side of the cooler. Here you can see how the heatpipes connect to what seems to be the center of a one-piece heatsink.
In Figure 6, you can see the top of the cooler. The 140 mm fan doesn’t completely cover the heatsink.
Figure 7 shows how the heatpipes are distributed on the base. Here you can notice that the Fiend Shark has not one, but two independent heatsinks.
- 1. Introduction
- 2. The Deepcool Fiend Shark
- 3. The Deepcool Fiend Shark (Cont’d)
- 4. Installation
- 5. How We Tested
- 6. Our Tests
- 7. Main Specifications
- 8. Conclusions