The Top, Bottom, and Rear Panels

The top panel of the Corsair Vengeance C70 is meshed and supports two 120 mm or 140 mm fans, and it comes with rubber rings for these fans. One of the highlights of this case is the presence of two carrying handles that resemble the carrying handles used on ammunition boxes. The top panel supports the installation of 240 mm radiators of liquid cooling solutions.

Corsair Vengeance C70 caseFigure 7: Top panel

Corsair Vengeance C70 caseFigure 8: Carrying handle

The bottom panel has air filters for the power supply fan and for the optional fans.

Corsair Vengeance C70 caseFigure 9: Bottom panel

The rear panel and the interior of the Corsair Vengeance C70 are painted with the same color as the exterior – military green, in our sample.

The case has eight expansion slots, using vented covers.

There is a 120 mm fan on the rear panel (Corsair A1225M128), using a standard three-pin fan power connector, but the manufacturer doesn’t disclose its technical specifications.

On the Corsair Vengeance C70, the power supply goes on the bottom part of the case.

There are two holes for hoses of liquid cooling solutions, each measuring 1.2” (30 mm) in diameter. To use these holes, you must break their metallic covers and toss them away.

Corsair Vengeance C70 caseFigure 10: Rear panel

Let’s now take a look inside the Corsair Vengeance C70.

Gabriel Torres is a Brazilian best-selling ICT expert, with 24 books published. He started his online career in 1996, when he launched Clube do Hardware, which is one of the oldest and largest websites about technology in Brazil. He created Hardware Secrets in 1999 to expand his knowledge outside his home country.