On the backside we have the plugs for connecting the power supply to the PC. This connection is done through two cables. On the place where the PC power supply is originally installed you must install an adapter, which converts the cables coming from the power supply into the cables to be used inside the PC.

click to enlarge
Figure 4: XG Magnum 600 External, back view.

click to enlarge
Figure 5: Adaptor to be installed on the computer case, on the place the PC power supply is normally installed.

click to enlarge
Figure 6: Cables to connect the power supply to the PC.

click to enlarge
Figure 7: Cables to be used inside the PC.

This power supply is actually a rebadged Seventeam ST-600EAZ power supply.