|Transforming your Radeon 9800 Pro into a Radeon 9800 XT|
With the Radeon 9800 XT release, ATI started manufacturing its Radeon 9800 Pro using the same core of this new chip, called R360. Thus, the newer Radeon 9800 Pro with the R360 core are, in fact, Radeon 9800 XT running at lower clocks. While the Radeon 9800 Pro works at 380 MHz and access the memory at 340 MHz (680 MHz DDR), the Radeon 9800 XT works at 412 MHz and accesses the memory at 365 MHz (730 MHz DDR). Since the only difference between these two chips is the graphic processor and the memory clocks, it is possible to transform a Radeon 9800 Pro into a Radeon 9800 XT by doing a video card BIOS upgrade, if your Radeon 9800 Pro has the R360 core. This upgrade also changes the model registration, which makes the Windows and the other programs identify the card as a Radeon 9800 XT. Today we will teach you how to make this transformation, saving you some money.
The first thing you need to know is if your Radeon 9800 Pro has the "old" core (R350) or the "new" one (R360). Only boards based on the new chip model (R360) can be transformed into a Radeon 9800 XT. This identification can easily be done by counting the number of memory chips available on your board. If your board has 16 chips, it uses the R350 and cannot be transformed. But if it has 8 chips, it uses the new R360 core and can be changed to a Radeon 9800 XT with this tutorial.
Before performing the modification, you can check wheter it will work or not, performing an overclocking on it, using PowerStrip software (http://www.entechtaiwan.com). Configure your board to run at 412 MHz (core) and 365 MHz (730 MHz DDR, memory) and run a 3D benchmarking software like 3DMark03 (http://www.futuremark.com/products/3dmark03/) to check if your board runs smoothly with this overclocking. If it works fine, you can perform the upgrade process we will explain. If it doesn't, you will have to find, using PowerStrip, which are the top clocks your board supports, and change its BIOS with them. We'll talk about this later.
| Page 1 of 2 | Next » |
|Print Version | Send to Friend |
| Comments (1)
October 1, 2013 - 7:23 AM PST
September 30, 2013 - 7:23 AM PST
September 30, 2013 - 7:22 AM PST
September 27, 2013 - 5:33 AM PST
September 27, 2013 - 5:32 AM PST
September 27, 2013 - 5:30 AM PST
September 26, 2013 - 6:30 AM PST
September 26, 2013 - 6:21 AM PST
September 26, 2013 - 6:15 AM PST
September 25, 2013 - 5:27 AM PST
Our Most Popular Articles
Latest Threads in Our Forums
by Gabriel Torres
by Cveti Cvetkov
by Hardware Secrets Team
by tomahawk 1705