| Thermaltake WATER2.0 Performer CPU Cooler Review |
|
|
|
| Installation |
 In Figure 9, you can see the backplate for use on Intel CPUs. You must insert the four nuts into the backplate before attaching it to the solder side of the motherboard. 
click to enlarge
Figure 9: Backplate
The second step of the installation is a little complicated. You must mount the frame on the block, as shown in Figure 10. 
click to enlarge
Figure 10: Frame installed
The last step is to install the system inside the computer, attaching the block on the CPU and the radiator on the rear panel, on the space originally designed for the rear fan. You must remove the rear fan of the case, if your case has one. Both fans must be installed as exhaust. 
click to enlarge
Figure 11: Installation finished
|
| « Previous | Page 4 of 8 | Next » |
| Print Version | Send to Friend |
Bookmark Article
| Comments (2)
|
|
|
|
|
 Latest News
May 24, 2013 - 6:39 AM PST
May 23, 2013 - 9:26 AM PST
May 22, 2013 - 9:39 AM PST
May 22, 2013 - 9:24 AM PST
May 22, 2013 - 9:23 AM PST
May 22, 2013 - 9:22 AM PST
May 21, 2013 - 10:11 AM PST
May 20, 2013 - 7:42 AM PST
May 20, 2013 - 7:40 AM PST
May 17, 2013 - 9:10 AM PST
Latest Content
Our Most Popular Articles
1,880,289 views
1,813,156 views
1,438,149 views
1,408,549 views
1,295,914 views
1,150,068 views
1,092,616 views
805,406 views
743,120 views
730,304 views
Latest Threads in Our Forums
by vla
by Gabriel Torres
by Hardware Secrets Team
by Onus
by c.hegge
by Hardware Secrets Team
by Hardware Secrets Team
by Hardware Secrets Team
by Hardware Secrets Team
by Hardware Secrets Team
|
