| Thermaltake WATER2.0 Extreme CPU Cooler Review |
|
|
|
| Installation |
 In Figure 10, you can see the backplate for use on Intel CPUs. You must insert the four nuts into the backplate before attaching it to the solder side of the motherboard. 
click to enlarge
Figure 10: Backplate
Before installing the WATER2.0 Extreme, you must assemble the frame with screws on the block, as shown in Figures 11 and 12. 
click to enlarge
Figure 11: Frame assembled
click to enlarge
Figure 12: Frame installed
The last step is to install the system inside the computer, attaching the block on the CPU and the radiator on the top panel of your case. 
click to enlarge
Figure 13: Installation finished
Figure 14 shows the main screen of the control software. You can choose one of three operation modes: Extreme, Silent or Custom. We repeated our tests on both Extreme and Silent modes. 
click to enlarge
Figure 14: Control software screen
|
| « Previous | Page 4 of 8 | Next » |
| Print Version | Send to Friend |
Bookmark Article
| Comments (1)
|
|
|
|
|
 Latest News
May 22, 2013 - 9:39 AM PST
May 22, 2013 - 9:24 AM PST
May 22, 2013 - 9:23 AM PST
May 22, 2013 - 9:22 AM PST
May 21, 2013 - 10:11 AM PST
May 20, 2013 - 7:42 AM PST
May 20, 2013 - 7:40 AM PST
May 17, 2013 - 9:10 AM PST
May 16, 2013 - 9:58 AM PST
May 16, 2013 - 8:35 AM PST
Latest Content
Our Most Popular Articles
1,878,946 views
1,812,899 views
1,437,212 views
1,407,837 views
1,295,328 views
1,149,551 views
1,091,751 views
805,146 views
742,611 views
730,199 views
Latest Threads in Our Forums
by zlmbljc
by Hardware Secrets Team
by Hardware Secrets Team
by Hardware Secrets Team
by Hardware Secrets Team
by Gabriel Torres
by keith.aranjuez
by Hardware Secrets Team
by Gabriel Torres
by Hardware Secrets Team
|
