| Thermaltake WATER2.0 Extreme CPU Cooler Review |
|
|
|
| The Thermaltake WATER2.0 Extreme (Cont’d) |
 In Figure 6, you can see the cables that come attached to the block. There is one connector that goes on the motherboard CPU fan header, two male connectors where you must plug in the fans, and one USB connector that you must plug in on a free USB header of your motherboard. 
click to enlarge
Figure 6: Block wires
Figure 7 shows the top of the block. 
click to enlarge
Figure 7: Block
The base of the block, which is made of copper, is revealed in Figure 8. The thermal compound comes pre-applied. 
click to enlarge
Figure 8: Base
Figure 9 illustrates the two 120 mm fans that come with the WATER2.0 Extreme. The fans have four pin connectors, which means they are compatible with PWM speed control. 
click to enlarge
Figure 9: Fans
|
| « Previous | Page 3 of 8 | Next » |
| Print Version | Send to Friend |
Bookmark Article
| Comments (1)
|
|
|
|
|
 Latest News
May 22, 2013 - 9:39 AM PST
May 22, 2013 - 9:24 AM PST
May 22, 2013 - 9:23 AM PST
May 22, 2013 - 9:22 AM PST
May 21, 2013 - 10:11 AM PST
May 20, 2013 - 7:42 AM PST
May 20, 2013 - 7:40 AM PST
May 17, 2013 - 9:10 AM PST
May 16, 2013 - 9:58 AM PST
May 16, 2013 - 8:35 AM PST
Latest Content
Our Most Popular Articles
1,878,827 views
1,812,877 views
1,437,148 views
1,407,775 views
1,295,299 views
1,149,505 views
1,091,701 views
805,134 views
742,559 views
730,193 views
Latest Threads in Our Forums
by zlmbljc
by Hardware Secrets Team
by Hardware Secrets Team
by Hardware Secrets Team
by Hardware Secrets Team
by Gabriel Torres
by keith.aranjuez
by Hardware Secrets Team
by Gabriel Torres
by Hardware Secrets Team
|
