|Thermaltake WATER2.0 Extreme CPU Cooler Review|
Let’s test the Thermaltake WATER2.0 Extreme, a sealed liquid cooling system with a 240 mm radiator, two 120 mm fans, and USB interface. Check it out!
The WATER2.0 Extreme is the top notch member of the WATER2.0 family, which also includes the WATER2.0 Pro and the WATER2.0 Performer, which we’ve already tested. The block and fans seem to be the same on the three water coolers, but the radiator of the Extreme is 240 mm long, supporting two side-by-side 120 mm fans.
Like its brothers, the WATER2.0 Extreme is made by Asetek.
A unique feature of the WATER2.0 Extreme is the USB interface. The block should be connected to a free USB header on the motherboard, and an application controls the pump and fan speeds, in manual or automatic modes.
Figure 1 shows the enormous box of the WATER2.0 Extreme.
click to enlarge
Figure 1: Package
Figure 2 shows the contents of the box: the radiator-block set, fans, manuals, CD with control software, and installation hardware.
click to enlarge
Figure 2: Accessories
This water cooler is discussed in detail in the following pages.
| Page 1 of 8 | Next » |
|Print Version | Send to Friend |
| Comments (1)
October 1, 2013 - 7:23 AM PST
September 30, 2013 - 7:23 AM PST
September 30, 2013 - 7:22 AM PST
September 27, 2013 - 5:33 AM PST
September 27, 2013 - 5:32 AM PST
September 27, 2013 - 5:30 AM PST
September 26, 2013 - 6:30 AM PST
September 26, 2013 - 6:21 AM PST
September 26, 2013 - 6:15 AM PST
September 25, 2013 - 5:27 AM PST
Our Most Popular Articles
Latest Threads in Our Forums
by Gabriel Torres
by Hardware Secrets Team
by Rafael Coelho