Notice: Undefined index: article444 in /www/hardwaresecrets/article.php on line 5 Thermaltake V1 CPU Cooler | Hardware Secrets
Hardware Secrets
Home | Camera | Case | CE | Cooling | CPU | Input | Memory | Mobile | Motherboard | Networking | Power | Storage | Video | Other
First Look
Gabriel’s Blog
Main Menu
About Us
Awarded Products
Manufacturer Finder
RSS Feed
Test Your Skills
Subscribe today!
Build Your Own PC Do-It-Yourself For Dummies
Build Your Own PC Do-It-Yourself For Dummies, by Mark L. Chambers (For Dummies), starting at $8.04
Home » Cooling
Thermaltake V1 CPU Cooler
Author: Gabriel Torres 55,913 views
Type: First Look Last Updated: May 7, 2007
Page: 1 of 1

We took a look at the latest high-end CPU cooler released by Thermaltake, V1 (a.k.a. CL-P0401), which is made of copper with four heat-pipes and using a very different design. Check it out.

Thermaltake V1
click to enlarge
Figure 1: Thermaltake V1 inside its box.

It is impossible to not have an opinion about V1 design. Love it or hate it, you can deny that it has a very different design. It has two heatsinks with a fan-like design, using four heat-pipes. At first you may think that these heat-pipes are connected together in an U-shaped design, however if you pay close attention you will see that these four heat-pipes are completely independent.

Thermaltake V1
click to enlarge
Figure 2: Thermaltake V1.

This cooler is made of copper and its base is so smooth that it looks like a mirror (because of the angle we took the picture shown in Figure 3 you can’t see that). On top of the cooler base there is an aluminum plate that holds the fan and the heatpipes to the base. We think this plate could be made of copper as well for a better look and maybe better performance.

Thermaltake V1
click to enlarge
Figure 3: Thermaltake V1 base.

Between the two heatsinks – which are installed facing each other – there is a 110 mm fan, which glows blue when turned on.

Thermaltake V1
click to enlarge
Figure 4: Fan between the two heatsinks.

This fan has a speed control knob, allowing you to change the fan speed from 1,300 rpm to 2,000 rpm. According to Thermaltake, this fan can blows up to 86.5 cfm of air.

Thermaltake V1
click to enlarge
Figure 5: Fan speed control knob.

According to Thermaltake this CPU cooler is compatible with sockets 775, AM2, 940, 939 and 754.

Print Version | Send to Friend | Bookmark Article  

RSSLatest Content
Zalman ZM-T3 Case Review
May 28, 2015 - 3:00 AM
ASUS H81M-A Motherboard
May 27, 2015 - 4:31 PM
ASRock FM2A88X-ITX+ Motherboard
April 27, 2015 - 2:40 AM
GeForce GTX TITAN X Video Card Review
April 22, 2015 - 4:00 AM
A10-7800 CPU Review
April 6, 2015 - 2:50 AM
Samsung Galaxy A5 Smartphone Review
March 31, 2015 - 2:47 AM

2004-15 Clube do Hardware, all rights reserved.
Advertising | Legal Information | Privacy Policy
All times are Pacific Standard Time (PST, GMT -08:00)