Hardware Secrets
Home | Camera | Case | CE | Cooling | CPU | Input | Memory | Mobile | Motherboard | Networking | Power | Storage | Video | Other
First Look
Gabriel’s Blog
Main Menu
About Us
Awarded Products
Manufacturer Finder
RSS Feed
Test Your Skills
Subscribe today!
Build Your Own PC Do-It-Yourself For Dummies
Build Your Own PC Do-It-Yourself For Dummies, by Mark L. Chambers (For Dummies), starting at $8.03
Home » Cooling
The Truth About Fluid Dynamic Bearing (FDB) Fans
Author: Gabriel Torres 53,870 views
Type: Tutorials Last Updated: August 1, 2013
Page: 1 of 5

The fluid dynamic bearing (FDB) was first used in hard disk drives. It is a modification to the standard sleeve bearing to improve the lubrication of the bearing, and thus increase the life span of the fan while retaining one of the most positive aspects of sleeve bearing fans, which is the low noise level. However, what can be classified as fluid dynamic bearing is somewhat controversial, and designs vary greatly.

According to some manufacturers, in order to be considered a “true” fluid dynamic bearing, the inner of the bearing must have herringbone-shaped inner grooves, as shown in Figures 1 and 2.

Matsushita-patented fluid dynamic bearing design
click to enlarge
Figure 1: Matsushita-patented fluid dynamic bearing design

Matsushita-patented fluid dynamic bearing design
click to enlarge
Figure 2: Matsushita-patented fluid dynamic bearing design

However, this particular design is patented by Matsushita (Panasonic) and, therefore, only fans with bearings manufactured by companies that paid licensing fees to Matsushita will have this design. Because of that, bearings based on this design are more expensive, increasing the price of final products.

Bearing manufacturers that invested money licensing this design spend a good deal of time and money convincing its clients (fan manufacturers) that only bearings using this design can be called “fluid dynamic.” Therefore, there is a tendency for fan manufacturers that use Matsushita’s patented fluid dynamic bearings to think or even say that fans from other manufacturers using different fluid dynamic designs are “fake” or not “true” fluid dynamic bearings. Technically speaking, any kind of design that uses the principle of hydrodynamics can be called “fluid dynamic,” as this name, apparently, is not patented. Performance, however, may be different depending on the design that is used.

So, there is a second group of fan manufacturers that use a different design for their fluid dynamic bearings, as they decided to create their own design instead of licensing Matsushita’s design. From our research, these alternative designs vary greatly (we could identify four different ones within the thirteen fans we disassembled), with some more sophisticated (and likely better) than others.

Here is where the confusion starts. One of these alternative designs (let’s call it “alternative design 1”) is called “fluid dynamic bearing” by the companies that use it, but they are also called “rifle bearing” by several other companies. So, while technically speaking rifle bearing is a type of fluid dynamic bearing, companies that use the Matsushita-base design feel that this particular alternative design should use a different name (“rifle”), to make it clear for the user that the design of the bearing is not the same.

We have to agree that using two different names for the same thing is confusing. Users may think that a fan with an FDB bearing is better than a fan advertised as using a rifle bearing, while in fact this FDB fan may use a rifle bearing, and there may be no difference in the technology used by the two fans.

Some of the companies that use a non-Matsushita design call their bearings hydro dynamic, or HDB, in order to make it clear that they use an alternative design and not Matsushita’s. We think this is a good idea.

The difference of the design used on the bearing helps to explain why some FDB fans are much more expensive than others: fans with Matsushita’s bearing design will be much more expensive than a fan with a less sophisticated and easier to manufacture FDB design.

In the table below, we summarize the fans we disassembled (all of them sold as either “fluid dynamic bearing” or “hydro dynamic bearing”) and what we found out about them. Since we’ve already shown the Matsushita design in Figures 1 and 2, in the next pages we will show the other four designs we identified.





Shark 120mm Black Edition

FDB, Alternative design 1 (rifle bearing)



FDB, Alternative design 1 (rifle bearing)



FDB, Alternative design 1 (rifle bearing)

be quiet!

BQT T12025-MF-3

FDB, Matsushita design



FDB, Alternative design 1 (rifle bearing)



FDB, Matsushita design



FDB, Alternative design 2 (upgraded sleeve)



FDB, Alternative design 3 (upgraded sleeve)



FDB, Matsushita design



FDB, Alternative design 1 (rifle bearing) (Minebea)



FDB, Matsushita design



FDB, Alternative design 4 (YS Tech Sintetico), sold as HDB



FDB, Matsushita design

Print Version | Send to Friend | Bookmark Article Page 1 of 5  | Next »

Related Content
  • Anatomy of Computer Fans
  • Which is the Best Place to Install a Case Fan? - Part 1
  • Which is the Best Place to Install a Case Fan? - Part 2
  • Fractal Design Adjust 108 Fan Controller Review
  • NZXT Sentry Mix 2 Fan Controller Review

  • RSSLatest Content
    Zalman ZM-T3 Case Review
    May 28, 2015 - 3:00 AM
    ASUS H81M-A Motherboard
    May 27, 2015 - 4:31 PM
    ASRock FM2A88X-ITX+ Motherboard
    April 27, 2015 - 2:40 AM
    GeForce GTX TITAN X Video Card Review
    April 22, 2015 - 4:00 AM
    A10-7800 CPU Review
    April 6, 2015 - 2:50 AM
    Samsung Galaxy A5 Smartphone Review
    March 31, 2015 - 2:47 AM

    2004-15 Clube do Hardware, all rights reserved.
    Advertising | Legal Information | Privacy Policy
    All times are Pacific Standard Time (PST, GMT -08:00)